Search results

I purchased my first boat which was the cd 22 cruiser. I got a cdory because of the c-brats forum. I have done most of my maintenance and trouble shooted most of my boat issues from this site. I agree with others that both new and used will have the same work and maintenance needed. A...

That rod I believe is rated for 1-6oz of weight. It will work for using jigs up to 6oz. But when we fish with live bait we sometimes go up to 10-12oz of lead. That would be too much weight for the rod. I would feel better using the w & m rod for under 70 dollars and having a rod that is...

The dealer quoted 30 minute trouble shoot fee (60 dollars) and one hour labor which was 120. Yes 88 is not that bad considering;) Learn something new every season. The joy of boating;)

Thanks everyone for your input and help. It turned out to be a bad switch on the port side engine. We saw that salt water had corroded the switch and it was causing the switch to press on the trim up button. The relay was working fine. We didn't have to get a mechanic to figure this out...

Also 88 dollars for the Power trim tilt switch on the cowling it may be a 400 dollar project to change the internal relays and the switches Does any one know how we may be able to trouble shoot this problem to see where the problem may be at? Whether it is from the relay, switch or from the...

I just got quoted 115 dollars for internal relay for trim/tilt for a df150 suzuki 2006 Does that sound right?

When I put it into single or seperate trim mode the starboard works fine using the toggle on the starboard throttle. But the port side trims up automatic still. It may just be the port side engine. "Internal relay". Is that easy to install? That is very helpful information. All...

I hope that is too. Where do you replace it? Is it on the engine or inside the cockpit where the throttles are? Can you get that part at any marine store?

I have the twin Suzuki 150 fuel injected outboard 2006 model. Went for a cruise today. The engines were doing fine all day. As soon as I get to the marina both engines start to trim up without me touching any buttons. I was able to trim the engines down by pressing on the trim down button...