Search results

I've had a stellar season of catching kings this year and although I have had sucess there are still limitations in getting the right speed at times. Has anyone seen or attempted to put a kicker motor on a Tomcat and if so what power engine worked size of the kicker. Did the kicker add too...

How do I post pictures

How do I post pictures

Thanks everyone for the tips. I may also get the 32 gal Kodiak and install that near the aft seat as well. Would that be permanent location or would you be able to take it out with ease when not in use? Can you troll your swim baits with the x raps and the clones? Great ideas on trolling...

I just did a tuna run with some of my fishing buddies on his boat. We fished Westport and ran about 2 to 3 hours to our destination in rough sees. When we got to our spot we saw a few other boats fishing there as well and saw that the water was a change in color. A purplish blue. We heard...

Thanks for the input Bob The hole was drilled to mount a piece of starboard to the transom where we will attach the transducer to. I am sure we drilled through the hull because I can see the hole from inside the hull. It will be difficult to reach down there to do the repairs. What type...

The holes are less than half inch about 7/16 drill bit we used. Good idea about using a syringe to put the putty in. Is there a Syringe I could use with that size hole it should I make the hole a little larger?

Thanks Roger, do I need to seal the hole on the inside of the hull as well since we made a hole straight through to the inside? If we fill the hole from the outside and pack it tight will that be enough?

We readjusted the old transducer location and when we did that. We did not properly seal the holes so water leaked in from the hole. We got the boat out as fast as we could and trailered home. A few days later we wanted to relocate the transducer but this time use starboard so that we don't...

Can we use jb kwik quick setting cold weld?

We are using a marine slow set 24 hr cure epoxy. Can we use a quick epoxy set 50/50 instead?

Does it matter where we mount the transducer on the hull? In other words is there an optimal place to put it. Do I place it on the most lowest part of the hull?

Thanks Roger!! I bought the starboard you recommended 3/4". You install that first right? Use epoxy?

I have placed the transducer on the lowest part of the boat on the hull. Not on the bracket but on the lowest part of the boat forward from the engines. I don't seem to be getting accurate readings at the moment. We placed it on the starboard side

Thanks Bob and Roger for the help. Is there any way I can text you pictures of where we had it and where we are going to place it? Please PM you number if I can. I don't want to mess this up. Joe

Do you have a photo of that? I don't know what you mean about the outboard part of the starboard hull. Right next to where the outboard is attached? Does it matter which side?

I want to properly install an airmar tm 260 transducer on out Tomcat and I wanted to know where the best place to mount it. Thanks Joe

July 14th to 17th

I would love to join a tuna trip. We are doing a 4 day trip to Neah bay at swift sure bank for the king run and get some Canadian halibut. Would be great to buddy boat it with you then if you are fishing. We are planning to fish Thursday to Sunday. Let me know if anyone wants to join us...

Can you anchor out there? And if so any tips on where to anchor?