Search results

Hello all - I have the Fusion MS-RA200 and torn between buying the gimbal mount Fusion sells or to build an enclosure and fit it in there. I will be mounting this under the shelf on my 19' C-dory. I was thinking with the gimbal mount I can take the stereo out of the boat along with all my other...

Thanks - i do know I have a quick disconnect on the kicker, the hose that I bought has two different quick disconnects on either end. One I will need to cut off no matter what as to connect to the water fuel separator I will need a hose clamp. The other end that connects to the motor is a quick...

Hello, I have two 2008 Honda motors, a 90HP and a 9.9 hp. I am changing out the fuel hose assembly (primer bulb and hoses on either end). I just bought one from a local Honda dealer and the model number they sold me is 04101-zw9-010 which according to the Honda site is for 2001 or earlier...

Great trailers!!

I just replaced my tanks in my 2008 19' Angler. Moeller 23 gallon tanks, FT2339 AND FT2340 are the model numbers. Bought them from Fisheries Supply in Seattle. $201.98 a piece.

Hello everybody - I need to remove both fuel tanks on my 08. 19' Angler. It looks like the only way to do this is to remove the flotation (?) that is mounted uner the splash well between the two tanks. It looks like it is attached with only the blow in expanded foam. Has anyone removed this? Any...

I am pretty sure I need to change my fuel pick up tubes on my 19' 2008 Angler. the tanks are Moeller. I disconnected the fuel hose, took the barbed fitting off of the pick up tube aluminum fitting then loosened the nut that holds the pick up tube to the fitting onto the tank. No luck, then...

Yes I have one for each.

Thanks Charlie - Yes hopefully those are still good as they were just changed out a week ago. I will drain that gas and wash those plastic tanks out with water and let them dry out for a week. Also change the Racor filter. Is there anything else I should change just in case or look at.

THANKS!!!!

Took boat out to lake for the first time yesterday. Went to start motor and was having hard time with both the main and kicker but finally got kicker going and later main. I believe I was having hard time getting fuel to both as the bulbs were not getting hard but finally did. I noticed debri in...

Not sure if this helps but I bought a 08, 19' Angler last December. Motors are a 90hp and 9.9 kicker (both Honda 08's), trim tabs, ez loader trailer, bare boat meaning no electronics at all. No washdown or swim step. I got it for $22,000. Boat and motors had about 40 hours on them. Boat and...

19' or 22' or did i miss something?

Call Dwayne Mackey - 360-380-1010. He is the guy that Triton uses. I just spoke with him today about making interior grab rails and rocket launchers for my boat.

Hello all, I am installing a couple 6-1/2" stereo speakers on my Angler. I am limited for space and was thinking of installing them on the face of the storage boxes facing the berth. Other option would be to install them on the face of the boxes facing the cockpit. Has anyone done an install...

If you are military try USAA for a loan. Did it all on line, a bit over the phone. 6.24%. Best I could find at the time and I looked alot. That was back in December of last year.

Thanks Roger!!!!!

Anybody??

SSI Custom plastics makes their coaming boxes. That is what I was told when I talked to the factory about a month ago.

Hello - I have the Airmar P58 transducer and ready to install on my 19' Angler. Have read alot and talked to some and thought you all would know best so question is. Where is the best location and is it an easy install. Any do' and dont's before I try or would it be wise to have someone install...