Search results

journey on Believe it or not I took the measurement off the box. It's in print!! Benton

I should have added the current wiper shaft hole and the mounting hole are about 6 3/4" apart. The AFI 1000 holes are 5 5/15" apart. I can't find the measurements for the Ongaro 33611. Benton

Well I thought I had read enough on here to order a replacement for a dead motor. These are the original AFIs so I thought I could just get the same motor and it would be installed in the exact holes. I thought I read AFI 1000 so I ordered the Marinco AFI 1000. It is quite a bit smaller than...

I see rcwass hasn't posted since 2012, I think. For anyone that has replaced window rubber seal what have you used and what results? I did call American Marine and the seal is now $7 per foot plus several other add on costs. Benton :crook

rcwass How has the window seal held up so far? I hoped to see your results before contacting American Marine about the TP-240 seal. Benton :smiled

Well it looks like we will be able to get the Alaska cruise done. Maybe the 3rd time is the charm. We will not be able to attend the gathering but I look forward to seeing the posts and pictures. Benton

We are on the AICW on SE NC coast. You are welcome to come down and check out our 25' Cruiser. I'm getting ready to put it in for service on a few items however. Benton Blalock

Got mine first one an hour ago and it is awesome! Great job for putting it together and to those that submitted the pictures. Benton

We could be interested in doing this if 'the Rona' shuts down our Alaska cruise in May for the 3rd straight year. We would boat from our home about MM230 on the AICW. Benton :smilep

Well it is a 3 position switch - Off, 1 and ALL. Looks like I need to run with the switch at All and then when we get to a day destination move to 1, the fridge and VHF could still run while we are at play. Then back to All for the run home. I'll see how my batteries act with this change in...

Thanks for this. The more research I did the more I was thinking the Guest can't be my problem. The house batt when new tested at 100% and then a short time later tests at 80%. And that is after I put it on my smart portable charger. Both batteries are start 24 series. I'm planning to move the...

Ok I'm going to allow myself to sound dumb, but here goes. I have been reading and watching videos concerning chargers and multi battery set ups. Question: Is my Guest charger doing any charging while underway? I seldom hook up shore power to the boat. I do not store the boat with shore power...

cmetzenberg and others I've had the same blown fuse problem as you , after replacing my original Jabsco macerator. I kept messing with it and finally decided to loosen the 4 bolts holding the impeller housing on. I used the straight slot to test for ease of movement and that seems to have fixed...

I'm going to replace it for sure. Just like knowing if I am accomplishing anything while replacing.

So it appears I can test the Guest by using my smart charger to get the battery up to 100%. Then plug in power to the boat and check to see if the Guest drops the voltage to storage amount. If my meter shows 13+ across the terminals then the Guest is cooking the house battery? I'm planning to...

Sorry, I should have said I recently replaced that battery. Both are 24 Series. I replaced both maybe in May and kept having charge issues with the house. I replaced that one at least 1 time since that. No problem with the start one. As you can tell my Guest is from 2012. I'm just wondering if I...

I have 2 batteries and the original Guest charger. I think it is killing my house batt. How do I test to see if the Guest is sending too much too long to the house battery?

I also pm'd. Benton :D

I got the A,B bunks for my LoadRite trailer making it proper for my 25' C-Dory. Using the info received from you guys I have installed and adjusted the bunks. Now all I need to do is load the boat and double check my handiwork. :thup

Colby, Thanks for your input. Sorry my link was so bad. I went into your albums and saw the pics of your LoadRite when doing the bottom paint. That is what my trailer will look like once I get the AB bunks. Benton