Search results

My BF-200 was cutting out and coming to a stall whenever I exceeded 4000 rpm. Turns out the problem was that the corrosion was so bad where the cables and fuel line entered the motor, the fuel supply was getting choked off by the corrosion buildup. If I stayed below 4000 rpm the motor ran fine...

But alloy has disadvantages too....not that fiberglass doesn't....All of the alloy boats I have had eventually developed cracks that needed to be welded.. And all aluminum boats eventually corrode in saltwater. There is no exception to that rule no matter what a salesman says.

Speaking of cell service, has anyone tried Consumer Cellular? I think they are AT&T and T-mobile. I primarily use my phone off the coast of Washington out of Westport and was wondering if Consumer Cellular works offshore. Thanks for any info forwarded.

If you are a salmon fisherman beware of taking your dog fishing (or petting them before going fishing). Salmon only have three natural predators in the water while returning to spawn. Bears, humans and wolves (dogs). The dog smell on lures can repel salmon as salmon can smell one part per...

Fifty pounds equals 8 gallons of gas. Do you presently notice a difference in performance and handling after you burn 8 gallons? Fifty pounds isn't much of a difference. Get the motor you want. Just my 2 cents. Edit: Fill a couple of sandbags with fifty pounds and throw them in the motor well...

The salmon used to be in closer but the sardine sienes decimated the anchovy/herring population out in front of Westport. There is no bait in close to attract the fish. There used to be lots of bait where fresh water met the saltwater. Simply put, there is no reason for the fish to be where...

Canary rockfish from 500-600 feet of water. Twenty pound or less lings are number two. The big lings (30-40 pounds) aren't nearly as good 15-25 pounders. Number three would be sockeye or a 10 pound or less male silver.

WOW Reelin2, you are a true craftsman/boatbuilder. Excellent job.

Boil a pan of water on your stove. Dip the end of the hose in the pan of hot water for a minute or two. The hose will slip right over the barbs while hot and supple. Tighten the clamp on the soft end of the hose over the barbs. It will won't leak.

What is the tip amount you need from the average user to cover the transition?

Your calipers are held in place by stainless steel pins. The calipers have brass bushings inserted that have to slide back and forth on the pins. Corrosion gets in between the pins and the bushings and doesn't allow the caliper to slide around and self center. Pull the pins and clean them...

One other thought about kickers is the size of the alternator. If you use your kicker for trolling in foggy conditions and have to use radar so you don't get ran over, plus have your nav lights on, sounder on and a refrigerator on board, it's good to have a alternator with a higher output. That...

I have a 26 foot Cape Cruiser with a Honda 15 hp kicker. It does 7.5 mph with the kicker. I didn't realize that was hull speed but it makes sense now as raising the throttle from 3/4 to full doesn't affect the speed hardly at all.

I have a CC26 and love my boat but....in the ocean with a 2 foot chop and a swell greater than 4 feet you aren't gonna go faster than 12-15 knots. Of course going with the wind/swell isn't as bad. The Tom Cat would be a much smoother ride for most ocean conditions. 99% of my boat usage nowadays...

For freezing crab try this: Crack your crab and put it in a zip lock sandwich baggie in the amount you generally use. Partially close the baggie leaving a small air escape hole. Roll the baggie of crab on the table to expel all the air and then finish sealing the baggie. Then vacuum pack. Works...

I had fuel tank pitting on my 26. I had the pits on the tank welded up, then I had Line-x coat the entire surface of both tanks. So far the fix looks to be in excellent shape.

The idea was there from the early nineties because that was the last time I fished there.

At China Creek on the Alberni Inlet they used to give you red 2x2s with a sharpened nail protruding to jab in the end of the deadhead. There were quite a few deadheads due to the many log rafts waiting to be processed in the local mill.

When you are trolling for fish the kicker is "all the way down" and blocks any sonar pulse to that side.

I personally think the sidescan is bulls**t. I have the Garmin 94sv along with the Navnet II Furuno on board. I've asked many salesmen at boat shows and their factory seminars how does the sidescan see through an outdrive or kicker motor. One salesman even said "well the sidescan actually looks...