Search results

Door is toast. I will be building a new fiberglass one. (Pictured is the bottom of the door).

The beginning of my new fiberglass door. Very simple MDF mold. Modeling clay radiuses in corners, Duratec surfacing primer sprayed. Followed by Lite polishing, 4 coats of wax release, 2 coats of PVA.

Door is finished with window and lock installed. Steering console ready for baystar system.

Remote mounted Mercury 9.9 in action

Garelick Heavy Duty outboard bracket. 9.9 kicker, remote controlled.

I do a lot of trolling for Salmon, I needed steering and throttle on the deck. I built the helm mount by modifying one I had on hand from a Livingston. Steering is a Baystar system, Mercury Shift Throttle control. I love the set up. 10? Garmin plotter / Sonar not show.

My boat is moored 6 month or more of the year. I wanted the outboard completely out of the water when docked to eliminate corrosion / Sea Growth. The motor is mounted with a 4? setback manual jackplate.

Rode was jumping off the side of the factory Sea Dog Roller. I modified it by welding the EZ Anchor supplied roller to the rear. Works great!

E-Z Anchor Patriot 2 Drum Anchor winch

Another view. Loaded with 30ft 1/4 chain, 150ft 3/8 nylon, 150 ft 5/16? Dyneema.

Rocna 6kg fisherman anchor. SeaDog pivoting bow roller.

EZ Anchor Patriot 2. This is the best upgrade I have made. Push of a button deploy and retrieve. No more wet rope in the cuddly.

I repowered with a Mercury CT 115 last year, couldn’t be happier. I went with a 25” shaft with a manual jackplate as the boat lives in the water six months of the year. I cannot comment on the twins as they were junk when I bought the boat.

I have the same motor, what pitch prop are you running? I am currently running a 13 on my 2023 115 command thrust.

What is the diameter of the repair? Easiest fix would be to find / make a trim ring, then install over the damaged area. Short of that you will need to grind out the damaged area, glass then match color and finish. Its above the water line, not structural, I’d go with the first option unless you...

Thank you, that is what I was looking for.

I’m inclined to use a epoxy barrier coat on the classic with the wooden ribs ( sorry if wrong term). Are there any classic owners here that have bottom paint? The boat will be moored during the summer months. Thanks

Hello all, I have a new to me 1981 22 Angler Classic. Excuse me if my terminology is not correct. I’m wondering how the wooden beaching skids are attached to the flat hull. The boat will be moored in saltwater four months on the year. Any special treatment prior to painting? I am very familiar...