Search results

Thanks Guys, I'll go with the tall one. Hey Sagebrush, can't do... it's my favorite eaten fish.........hard to come by.

I'm in the process of having a radar arch built for my CD25. I'm wondering which one to go with the short one or the tall one. I carry a dingy on top, but with a camper back up it would still have to be removed from the front with a tall arch installed. Another question are the pole holders...

Thanks for all the replies. The reason I was going to pull the deck is I'm going thru and sealing all screw holes as a winter project. I figured there are probably some underneath the deck. I've found the ones around the perimeter holding the deck down aren't sealed.

I'm curious if anyone with a CD-25 has pulled up the rear deck floor. Looks to be 6 large screws in it and then siliconed around the parameter of each side. I'm in the process of resealing all hull penetrations and was wondering how many are underneath the deck. I did pull one of the screws out...

The manufactures don't have a way out. There's a law on the books (I can't quote it right now) that states if a manufacturer requires the use of their oil only, then they have to furnish it for free. As long as you use an oil, synethic or not, that has the same specs or better you are fine. I...

205 lbs

Ling Cod

More Yelloweye

Yelloweye for supper

Knight Island Cove

Knight Island

Silver fishing

PICT0648

Resurrection Bay

Pat. I had the same thing happen to mine a few weeks back and finally pulled the exhaust hose off and found water inside. May have gotten there from hosing down the boat or rough water. Any way it was giving off white smoke and smelled like unburned fuel. Fired up and worked fine after that...

I need a SS prop for a CD 25 with a Honda 150hp. I've tried to read all the postings to find someone running one. Surely with all the 25's out there someone has one dialed in. Thanks......

Thanks guys....

I just purchased a CD25 and had the dealer exchange the alcohol stove for the wallas. On our first three day outing the stove would overheat while cooking and shutdown. I noticed in the installation manual that it states the stove needs to have ventilation holes or slot in the front of stove in...

Thanks for the replies. Think I'll make an extension from the kicker to get it more inline with the main. Then a tie-bar should work.

What kind of steering set-up do you have for your kicker motor?