Search results

Just had the same problem with my King Trailer. Replaced the brackets. Haven't figured out what caused it yet. It's only the outside brackest on that bolt to the front axle. Toyman, the brackets are all one piece. No welds.

I've always wondered why the manufactures didn't put an allen headed screws in there?

Castaway, I've owned tin boats and fiberglass boats over the years and there are pro's and con's to each which you have already mentioned. One thing I will say about a C-Dory or any fiberglass boat is they are definately warmer. There is a little more upkeep involved with fiberglass, potting...

Feeder King

Lings

More feeder kings

breasaw, I use the same puller. I just mounted the scotty base on the starboard side gunnel. Used some 1/8" aluminum as backing plate underneath. Mount is small and doesn't get in the way. If I want to trol while pots are soaking, pull one pin and puller comes off. Don't see a need for a swivel...

Have you changed your fuel filter? Something is going on there besides the prop size.

Data was derived from Honda fuel managment gauges. Yes I would like to get more info at different rpm settings. Water was a little rough last trip so didn't get all info I wanted. Have trip planned this week for Montaque Island. This will be around 80 miles one way so should be able to gets lots...

CD 25-BF150- 15 5/8 X 13 Honda Solas Stainless Prop- full fuel, water tank half full, 4 adults onboard, fishing gear for the day. Two foot chop. RPM MPH MPG GPH 2000 6.7 6.3 1.2 4000 12.5 2.3 6 4200 14...

Get a prop nut kit to take as a spare. It includes nut, cotter pin, and washer. The nut is 18 mm.

Jennykatz, If you have the Yamaha Fuel Management gauge it will connect to your Garmin. One wire, I forget the color. This will give you MPG.

Sweetens up the water of course!

I also like to add a cup of sugar to tank after flushing.

I keep a large gaff hook on port side in rod holder. As people come aboard I let them know this is how I recover anyone that falls overboard...........haven't lost anyone yet! In fact I can't get them close enough to the gunnel to fish. Humor aside, if I'm out alone fishing I tie a floating...

Designbug, It's not a big deal to epoxy a screw hole closed. Just drill into it with a 1/4" bit about a 1/4 ~ 3/8 of an inch. Fill with epoxy and your done. All screw holes need to be filled. If you're going to put a screw back in, it will need to be potted a little deeper than the screw is long...

Makes me wonder are there any other screw penetrations under the rear deck. My fresh water pump was also screwed down into hull with no sealant on the screws. I moved pump up along side battery and filled screw holes in hull with epoxy. Has anyone removed their rear deck? How is the fuel tank...

PWS

Hatch re-enforcement

Epoxy poured,