Search results

That is about the same level as mine which were factory installed. See the attached picture. http://www.c-brats.com/modules.php?set_ ... _photo.php

Maybe this one... http://www.lewmar.com/products.asp?t=2& ... 25044&u=lb

You might also try tracing the water line from the sink to the tank. Mine was missing a 90 degree elbow fitting at the tank. Instead they used a straight fitting, which eventually caused the attached tubing to kink and water to flow very slowly.

These two rivers form the beginning of the Tennessee River. My cruising guide says that it's not safe to run a larger boat up either river for any distance. Anyone know how far you can go in a C-Dory size boat? Thanks. Rob

Jonathan, That is a great story. Thanks for posting it. Rob

We have always used one fender on the rear cleat and another fender that hangs from the roof hand rail at the widest part of the boat. I have a line tied in a loop at the correct length to loop through the hand rail and then I attach the fender with a hook. All of my fenders have the same...

How about this Jay?

I have been taking off the standard nozzle on the new-style 5 gallon cans and dumping straight into a large funnel. The funnel is not the same make as you are looking at. Mine came from a local sporting goods store and is probably just a little smaller than the F3 model in your link. You...

Please put us down for one as well.

Another screwless option would be to use 5200 to adhere most of the block of wood, but in one smaller spot (maybe the center) use 5-minute epoxy. That way you can just hold it in place for 5 minutes until the epoxy sets, and then wait whatever time is necessary for the 5200 to set. Rob

clock & barometer / thermometer / hygrometer

storage location when not in use

table bracket - removable with two wing nuts

cocktail table / fish cleaning station

fishing rod holders (no holes in the boat)

Wow...now I have serious cockpit envy.

Hi Casey, I would like some more details on this setup. Thanks. Rob

Barry, I am interested in one that would butt up against the lower edge of the rub rail. I think that is why the link I posted shows angles at the top rather than a rectangle. If yours is rectangular, I don't think it could be mounted as high on the bow as I am looking for. Would you happen...