Search results

I went with the smaller 8kw size and now wishing I would of gone with the 5kw. The one I have really puts out the heat even on the lowest setting. But to be fair the weather here in the PNW has been crazy hot, the rain is supposed to start up tomorrow and the daytime temperatures drop into the...

TR Thanks for the encouragement on my project. The heater is a Vevor 8 kw and puts out lots of heat ! Dave Raven Dancer

When the heater is on the lowest setting the exhaust temperature is 147 degrees f. Which seems pretty warm to me what’s the pub’s options Thanks Dave Raven Dancer

Yes you are correct about the sizes, the heaters exhaust pipe will fit inside the wallas exhaust pipe. I left about 3” of the heaters exhaust pipe sticking out of the end of the Wallace pipe to allow connection to the heater, the other end is the Wallace end which connects to the exhaust port as...

Does anyone know if it’s okay to use the Wallas exhaust port (factory install) for the exhaust from a small Chinese parking heater which I am installing. The Wallas gave up and is not repairable after17 years of faithful service. The boat is a 2006 and I’m not ready to burn it up. Thank you all...

We have the Thetford 365 port a potti and have always used Thetford Aqua Max and it seems to always work. I don’t know how old your porta potty is but the seals do go bad so that may be something you might want to check. Might be time for a replacement potty. Dave Raven Dancer

No worries I’ll just hang it back on the wall. We are heading up to the San Juan’s tomorrow for the next couple months so maybe we will see you up there. We launch and store the truck and trailer at Cap Sante in the middle of town. Have a great time if we don’t see you. Dave Raven Dancer

Hi Derin; I have a extra track that was in my boat when I bought it new. It is new but over the years it has become somewhat distorted, I’m sure a hairdryer and screws as it is being attached would straighten it out. Anyway it’s yours if you want it. I will be home until this Saturday then gone...

I may add that the center line is approximately 2” higher then the side portion creating a slight dome affect. Dave

Ok I’ll try again. The flat part of the ceiling is 54 1/2” stern to bow measurement. Port to starboard 31 1/2”. Is that the measurement your looking for ? Dave

Hi Paul, my 2006 high top is 77 1/2”. That’s measured from the center of the floor mid ship to the center middle of the ceiling. Hope that this helps you. Big Dave Raven Dancer.

Sandy your bread looks Amazing I too am a sourdough bread baker. Do you use a propane heat source on the Omni oven ? Thanks for all the information. Dave Raven Dancer

Pretty sure the BTU’s on the Wallas is quite a bit higher then the BTU output of the Origo alcohol stove which is 7000 btu’s per burner. And I am just not sure if that’s enough heat to raise the internal temperature of the oven to 350 degrees or more which is a pretty average baking temperature...

Has anyone ever tried using a Coleman oven over the two burner Origo alcohol stove? If so did it get hot enough to bake ? Thanks for the input. Dave Raven Dancer.

I ran a 75hp 4 cycle Yamaha on my 22’ for 17 years and loved it, there were a few times that I was wishing for a bit more horsepower but all in all was very happy with it. Just re-powered with a 115hp 2022 Suzuki. Haven’t had a chance to even break it in yet, I’m sure I will like the fuel...

They are the folks I bought Raven Dancer from back in 2006. I’m glad that as a family run business they are still going strong. Dave Raven Dancer

Just a quick shout out to Ryan at Sportcraft Marine. I have just recently re-powered with a 115 hp Suzuki; Ryan was very helpful and did everything he could do to get me a motor (took 6 months due to supply issues) during that time he stayed in touch with me every other week. Once he had my...

Thanks for all the advice. One turned up Dave Raven Dancer

Looking for a 2 burner Origo stove in good shape if anyone has one and wants to sell PM me with the price. Thanks Dave Raven Dancer

Hey Rolly thanks for your interest in the Canada charts. I will go down to the UPS store and see what the price is to send them to you. I already have a shipping tube you can have. Perhaps we should switch to email now so we don’t plug up the site with a personal transaction. My email is...