Search results

You got an address? I will swing by Tenn. and pick up byrdman and take care of it if you want....

Change the water pump, fuel filter, oil and filter, and I would replace the fuel lines and bulbs. Dump the old fuel and start fresh. i would also pull the pick up line out of the fuel tanks. then ends are brass and have a habit of corroding and falling off. Also the old pick up lines will get...

(3) Test conditions. The test must be conducted with no load other than a driver who must weigh no more than 200 pounds. Well there goes my next career up in smoke....

As T.R. said it depends on what you wantto do the most of. There are few boats at 22ft that make good cruising/fishing boats. Lots of better cruising boats and lots more of better fishing boats but very few that do both under 250k that you can put on a trailer and get 4 mpg. Just as a comparison...

so what is the formula for figureing out Hp rating? I mean ever cdory is based on a design that was made for a 70hp motor. Now many are powered with 90s and 115hp. Very little has been changed in the design. Nothing at the transom other then the amount of v or more to the point less of a lack of...

To me the sticker is about the weight of the motor not necessarily the HP. So if the 50 and 70 weight the same I would go wih the 70. better to use 50 hp of a 70 hp motor then to need more then 50 and not have it. Also get a bigger boat or fewer friends.

you could spray it with flex seal where you had the tape. it drys smooth and water proof.

On the water tank.. Go get the cheapest vodka you can get . Here at the tribal store its $4 for a half gallon. Drain your tank and pour in 2 bottles, cheaper then bleach, and let it sit for a day after you turn on the pump for a few seconds. you want the vodka in the pump and the lines all the...

Jody is my hero

Right so go have fun on the boat and be safer.

I quit reading after fun. everything is dangerous but if its fun do it anyway. you cant hide in your house all your life. hell boats are dangerous.

My only tip is to not use any metal clips, drings or fasteners when connecting the straps. Its quick and easy to use metal d rings but if the strap breaks then the d ring is coming back to the boat at a high rate of speed and can, and has, killed people. Only use knots or loops to make...

Maybe iam just missimg it but how hard would it be to put a port of call list with dates on thier web site? if you can find it gor me you have more patince then I do. should be the first thing on the site or at least in the first drop down menu.

KRC . For that style of fishing you want to use cut bait or a brads cut bait lure. troll slow or kick you motor in and out of gear . You could also try jigging for salmon.

I have tried the thule type racks but they always rust out in a few years. I used some motocycle handle bar extentions. https://www.amazon.com/gp/product/B016Z0A6YI/ref=ppx_yo_dt_b_asin_image_o05_s00?ie=UTF8&psc=1...

I would never get ride of radar. I dont use mine much but its like so many things in life, when you do need it you really need it. i usemine here inwashington a lot when its really sunny because of the low angle of the sun. you just cant see into the glare very well many days. Radar is very...

You really wonder why they dont keep this simple cheap part in stock.???

I have had lenco tabs on both the 22 and now the 27. would not go with out them and have had zero problems with them. I do like he electric over hydraulic because of room saved and never having to deal with leaks. but these are not your only two options. Take a look at zip wake. a lot of the...

just say this old post and the new updates of the water rising faster then most anyone thought. Where did all the " it will never fill again" group go???? and no it will not fill this year but it might by next year. Just like all the lakes in California do every 4 years or so. Any one that...

Define getting fuel. There is fuel going from the tank to the carbs but is it getting thru the carbs? and is it getting thru all parts of the carbs. I have been down this path before. A small piece of goop was pluging one of the tiny passages. Until you pull the whole carb apart and blow air...