Search results

Grandkids, Kirra and Eli.

Eldest granddaughter, Nevaeh.

G-son, Kaimani & his dad, my son.

Just returned from a family visit to north Idaho, where my son and his family now live. Spent one day on Lake Pend Oreille. Beautiful lake in the summer. Glacial water but plenty warm enough to swim in and the lake is huge. Much warmer than Lake Stevens where I live. Had no issues with the...

I installed one. Now our boat is practically a Norhavn. :lol:

Agree. It fit on our roller, although the tip is very close to the bow when compared to our old Delta. It also has excellent holding. It’s 20 lbs vs the 14 of our old Delta. The Delta 14 was at the lower end of their recommendation chart for a 25’ boat however. I’ve added a Manson swivel...

Had many a good time on Whalers in my youth/early 20s. A friend had a beautiful 13' with a new 25 horse. Even caught some small tuna (aku) off of Diamond Head in that little boat! But the water was in the 80s...not the 50s... :lol: 8)

FOLLOW UP TO THE TIE DOWN ENG BRAKE SAGA: When installing these crappy brakes, I cross-threaded one pin due to the issue I mentioned above; the bracket holes (threaded) not lining up with the caliper holes; and this is on "stainless" steel slider pins. When I filed a warranty, the...

Whalers like you own are awesome...in Hawai’i or Florida. :lol: You’ll love the cabin of a C Dory. Dry and out of the weather is needed up here and these little boats meet the requirements you posted above.

Break Out Another Thousand...

Pat ours are like those longer ones. I could measure them but the definitely clear the fenders. I replaced the wood and carpet a couple of years ago. Not difficult. If you have a staple gun and the proper sized S/S staples it’s just a matter of good marine bunk carpet and a razor type box...

Dr Bob hit them. Good list. Bilges are notorious for being wet. Make sure any penetrations aren't water-logged in the bilge. Our water pump was screwed in, as was the bilge pump and brackets holding up battery trays. I moved the water pump up to the battery tray and {epoxy} sealed all...

Ah. Probably the wheel cylinders are not moving. The push the shoes out.

There is a long discussion on Trawlerforum about image stabilized binoculars. Most posters recommended Fujinon over Canon due to the Fujinon technology for image stabilization. It was more conducive to boating over what Canon uses. I looked into them, but they are not inexpensive. Base...

Patrick, they are "binding" somewhere. If it's not all 4 then it's not the reverse lock out. I'd say rust is probably to blame. It's not the backing plates; trailer brakes don't have backing plates, which are usually found on older cars/trucks to keep debris from damaging the rotors. Most...

It's known in boating as a "wet head" since the shower and head are one. I had a Sunbrella "shower curtain" made that rolls up and out of the way when we don't need it. The door leaks badly due to the design. Also installed a solar/battery exhaust fan which helps with moisture and...

Harvey, I had no luck locating all S/S lines with S/S fittings. I did not contact the noted company, however. I ended up using a kit I purchased from one of the trailer parts suppliers. It had all five S/S lines, rubber hoses etc. I added a couple of brass T fittings and one extra rubber...

One of my co-workers has a tuna boat out of Depoe Bay, OR. IIRC it's a 36' Bertram with twin diesels. Deep V, enough speed to "find" the tuna, enough range to "search" for the tuna and get home and 36 feet of offshore, blue water design. The ocean is nothing to screw with...

Yes. Lot to like. Love the “salty look”. Like a commercial fishing boat. I’m finally retiring so my search continues. I’m on waiting lists for slips. I’m in no rush, however.

Agree. Center island queen is the way to go. The Admiral would not like climbing over me to hit the head at 0 dark 30. We have a list of needs vs wants: Fiberglass decks. No teak. Galley up. No wet head. Separate shower is a must. Centerline queen or mid cabin walk-around bed (like the 43’...