Search results

How do I place an ad for my C-Dory on c-brats

Thanks for the recommendations - I'll give Mary Kate's a go as well as the vinegar/water wash out. Thank you!

Windows stick and sometimes take a great deal of effort to slide them open, especially if the latch is set. Anybody have a remedy to wash out and/or lubricate the grooves the window slides in so that they work more easily?

The ANCO 20-12 blades (rubber insert and metal suspension), were an exact replacement for the wiper blades on my C-Dory, and were super easy to install. Great to have this accomplished! Thanks for all the input!

Talked with an ANCO technical Support rep who referred me to ANCO 20-12 Windshield Wiper Blades on Amazon for $21.92 a pop. We talked a bit and he seemed sure they would work. I ordered 2 and will let you know if they work - fingers crossed!

I should have mentioned that I need the entire wiper blades, not just the replacement rubber inserts. My entire blades are shot!

Some years ago, I managed to find replacement blades at Advance Auto Parts, but they say they now do not have any of the correct kind. I then checked West Marine with no luck. I cannot identify the manufacturer of the wipers on the boat. The blades are 12". Anybody have any info on what...

Attached partition to bottom of deck yesterday - think all well! Had to cut off rivet shanks and grind off exposed metal, drilled new holes in partition for screws, cut some 2x4s and pushed partition up, drilled pilot holes in bottom of deck for screws, removed 2x4s, ran a bead of 5200 along...

Thanks for the input - really appreciate. Believe I will have to cut off the shanks of the exposed rivets in order to close the gap between partition and underside of deck. They now pose a problem in not readily matching up to their holes in the partition. Think maybe then can use 2" x 4"...

1999 22' C-Dory. The rivets/fasteners holding the partition up between the cabin and the forward berthing are failing. The upper end of the rivets/fasteners appear to be embedded in the underside of the bow deck, the bottom end fits through drilled holes in the partition - but this end of the...

Sunbeam - Yes, that's the area I'm talking about - thanks very much for your input. I'll be taking a few closer looks at the boat and prior forum leak discussions.

I am having water intrusion into the cabin from each aft side of the base of the entrance to the forward bunk area - where the bulkhead/passageway meets the cabin deck. A break where the bulkhead/deck meet has developed there on each side. Seems like water mainly comes through these areas when...