Search results

I grounded my fuel fill by clamping a ground wire between a hose clamp directly to the top of the metal tube. Then ran the ground wire to a battery negative bus terminal. Assuming the following is from the current code revision, clamping metal-to-metal should suffice. They just do not want...

I have an older Evinrude 90HP and just went through several props before landing on one that worked. My boat came WAY over-propped with a 19 pitch that could barely hit 3600 RPMs out of an optimal 5000-5500 RPM range. After testing 3 and 4-blade 15p, I ended up with an aluminum Solas 4-blade 13...

I recently used https://lettering.com. The lettering seems decent, and it arrived quickly. You can use the site to design basic lettering or upload your own design for something more complicated. Others have used BoatUS. https://www.boatus.com/products-and-services/boat-lettering

Imtra Replacement Hatch, Burnewiin Mount, and Scotty Plug

Port Side

Sea Trial Launch

2014 Evinrude E-Tec 90 Hours

Rustic Rod Rack

Rustic Scotty Mount

Original fuel tanks had been removed but were included with the boat. Rustic pallet floor.

Starboard Side

Aft View

Interior

Galley

Looking at the picture, it might be Trim Lok trim seal or a similar product. https://www.trimlok.com/rubber-extrusion/trim-seal I've ordered it on Amazon and used it to seal kayak hatches in the past.

Boat Name Decal

Swim Step and Handle Installed

Not a hole, assuming I am looking at the correct Renogy DC-to-DC charger docs, but I would use 8AWG and 40A fuses for input and output of the charger. That way you only need one spare fuse size and wire size for the charger. 8AWG should be over-sized for the 20A load and distance between the...