Search results

Cabin Roof Radar Arch Fasteners (3)

Forward Deck Windless Bow Roller and Cleat Fasteners Improvements (1)

Forward Deck Windless Bow Roller and Cleat Fasteners Improvements (2)

Forward Deck Windless Bow Roller and Cleat Fasteners Improvements (3)

Cabin Roof Radar Arch Fasteners (2)

Cabin Roof Handrail Fasteners (4)

Cabin Roof Radar Arch Fasteners (1)

Cabin Roof Handrail Fasteners (1)

Cabin Roof Handrail Fasteners (2)

Cabin Roof Handrail Fasteners (3)

Forward Hatch Cover. Stretch cord back to midship cleat

Forward Hatch Cover (1)

Forward Hatch Cover with red side bungies attached (2)

Forward Hatch Cover - red side bungies missing

Hey Bill Nice offer, could you please put Pacific Wanderer on the map for us as well. I Really enjoy everyone's comradory, positive input, and humor, on this site. How lucky many of us are to own a C-Dory, live in such beatiful countries and have the freedom to explore our calling for...

Your welcome DD I don't know who has or has not an exhaust vent on the side of their boat for a stove. Those that do have, are you sure that you've ruled out water coming in the exhaust vent? I haven't done a test on the SS flex exhaust pipe or fittings, but I feel that it would be very...

2. Showing adjustaqble RPM. at the back, and a variety of accessories for cutting and sanding in tight locations. www.dremel.com

3. "DREMEL 4000" I did like the power this tool had. There were times I was grateful to have bought this model.

4. "DREMEL" 5/16" CARVING AND ENGRAVING 115. For a #8 to #12 screw, I drilled a 3/8" dia. hole with a twist drill through the gel coat and the top layer of fiberglass, down through the foam core till I touched the fiberglass on the other side of the foam core.

5. Then I went into the 3/8" hole with this bit on the end of the dremel and cut out the foam. By using the 3/8" hole in the fiberglass I could run the shank of this bit around the hole and make a bigger hole in the foam core, down to the next layer of fiberglass. Blow the hole out and it's...