Search results

I have a 2011 25 cruiser with the water tank under the center of the splash well, it seems to have developed a leak, not a big one, maybe a pint a day or so. At first I suspected the lower hose connection (pump feed) but that's clearly not the source. The two others fittings (fill and vent) are...

I have the Lenco trim tabs and used the Garelick bracket on the Starboard side for my 9.8 Tohatsu, works great.

With 3 strand nylon line a tapered splice is not too hard, lots of info online, even step by step videos. If you mess up the first one or two you still have plenty of line left to keep on practicing,.

Avidmagnum was a big, big help with advice and measurements for setting up my new LoadRite, thanks again Tom!

About 30x30 at floor level, depth varies somewhat as you go up due to hull shape and built in chases.

Did you fill the new filter with gas before installing? Are you holding the bulb vertical while squeezing?

I am very happy with the Vulcan 9 (20lb) fits nicely on the roller and sets fast. Great anchor. The only thing i need to be cautious about is to slow down with the windlass remote as the anchor comes close to the roller or it might swing widely as it lines itself up.

Oh!, Just saw the pictures! I get it. Best of luck.

I just removed my 1.25X1.175 spindle from my torsion axle arm, I backed up the castle nut flush with the end of the thread and hit it square with a 3lb short sledge, came out easy after a half dozen blows.

Thanks Colby, I have a few pictures I'll try to post. It was nice meeting everyone , the lake trouts were outstanding so were the fishing & filleting lessons! Alain

Yes,Tom that would be great if you did pick an xtra one, i was joking when saying i was fresh out, I never owned one and would not know what they look like, I'm not much of a fisherman especially on lakes, I do have a pole and a Michigan permit though. Colby, road closure updates are appreciated.

Not much time left for mail orders, we might leave this Sunday if I can get everything loaded and ready, it is damn hot down here.

I hope there is a tackle shop in Grand Portage because I am fresh out of Mepps#5...Thanks Tom!

Thanks for the offer Colby, we'll see how things go once on the road.

I finally found the National Parks Senior passes we got last year at Lake Powell! that's a relief. Lots to do before departure day and you have both been very helpful. I am not sure yet which way I will be coming up but Tucson to New Mexico and then cut across from Tucumcari to Kansas City...

Thank you Tom & Colby. I appreciate all the info. I assume fuel will be available in Grand Portage? Colby, you mention "no gray discharge' while in the Park waters, this means no use of the galley sink whatsoever?! sounds pretty drastic. Looking at the Grand Portage website I see there is a...

Mary and I will be coming up from AZ to Grand Portage to join the group. Is July 5th the launch day or the day before launch? Are all required permits available there? This will be our farthest trip North ever, very much looking forward to this adventure. Alain and Mary Deja La

Boris, I sent you a PM, don't want to drift off subject too much..

Boris, we are in Tucson,Az. And yes, it is a perfect boat for the Gulf, we just spent 3 months in the Sea of Cortez exploring the islands and fishing some. I followed installation instructions to the letter for the Garelick (15"drop model). I have a short shaft Tohatsu 9.8. After launching when...

Ok, I'll try to figure out how to post pictures. It is a Garelick bracket, the heavy one.