Search results

Hi I have a Honda Tach,Hr Meter model 37253-ZW5-010ZA that is showing a blinking code 8 on the left hand side before where the hours show. Does anyone have a list of these codes and or what a code 8 is. My Honda owners manual and or shop manual don't refer to any codes on the gauge. Thanks Jim

I would not think the high oil level has anything to do with this. The corrosion is a known Suzuki problem that the company has refused to honor under warrantee. It has to do with dissimilar medals and the steel bolt plug they put in instead of an aluminum one. Sorry Jim

I built an electric pump to get the gas out of the Gerry cans. It prevents spilling and also I broke one of the gas cap chains putting the nozzle into the filling hole and then had a pain of a time replacing the chain. This is not the cheapest option, but you buy an external electric car fuel...

Mine was also painted over and I had to use a breaker bar that attached to the allen wrench to break it loose. Most likely, like mine, the bolt has already started to rust on the thread lines and that is what is causing the problem of getting it out. I know other people that have had to drill it...

Hi Steve, based on what I hear the seconds bolt you talk about is not a problem and does not have to be replaced. I was trying to see where I read that, but can’t seem to find it. Maybe I should have taken the seconds one out, just to see? If you hear different let me know as I will also...

Hi Steve, for some reason the repair manual does not show the Anodes on the right side that have the O rings. Brown’s Point, which is located by me told me about these other anodes. I never knew there were another two until I spoke to him. I don’t have my boat here or I would take a picture...

Steve, This is where you can buy the bolt on ebay: http://www.ebay.com/itm/350576159300?it ... m=&vxp=mtr There are (4) internal anodes all on the port side of the engine. They are all the same type. Two are located on the left just above the bolt you will be replacing and one of those require...

Hi you really need to take the bolt out to see if you have the corrosion problem. For the outside everything looks great. It’s when you take the bolt out is when you see the corrosion and that the treads are starting to go. To get the side cover off all you need is a thin and long Phillips head...

Seems like Bebi Owl is out of business. I just check their site and they say they closed. You may want to talk to Jeff at Marinebeam as I think he told me he has a photo sensor LED light for an Anchor light with Perko fixtures. http://www.bebi-electronics.com/owl.html

I just spoke to Jeff at Marinebeam, as I have decided to start replacing some of my navigation and anchor lights with LED lights. He is offering a 10% discount to all C-Dory owners with any purchase thru 12/2014. When you check out just put “c-dory” (without the quotes) in the promotion code...

I use Shore Power at my dock to keep the batteries charged and to plug into the outlet behind the helm seat for power tools, drills, vacuums, soldering gun, etc. I have the dealer installed shore power, with a Guest 30 amp charger and GFCI in the outlet breaker. As my dock and boat house are on...

I installed just mine behind the cockpit in the last 3 weeks. I usually get 3 bars or so, but have seen it loose the connection on some occasions as I move back in the boat. As I have just played around with the unit for a week, don’t know really what to expect as far as range goes, but based on...

Hi, I have a Piranha Propeller which I think is 13” in diameter. The 4X18 I was referring to was the number of blades and the pitch. Yes I have a dealer problem, as he mounted the engine that low, and since he is no longer a CD dealer and is 500 miles from my home, I just have a problem now. I...

Hi yes the engine was mounted 3-4” below the ventilation plate and its bracket is sitting on the transom. I have been playing with different props and installed a permtrim years ago. It was better docking with the permtrim and was able to get the bow down somewhat. I really can’t get the bow...

Hi I have figured out that when the dealer mounted my 115 Suzuki, it was too low in the transom and has to be raised 2-4 inches. That being the case and the need to maybe play around with the actual settings, has anyone installed a jack plate on a CD 22’? If so any pro’s or con’s to doing this...

Dave, thanks again. I'll check the site out and let you know if I need any additional info. Have a great summer. Jim

Hi Dave, thanks so much for the building info and pricing. Based on what you have told me, I’m hopefully only looking at maybe 30% more. If not, then I may just have to add onto my current garage and just have a back-in solution. I want a drive in and drive out. I can't go too wide as I then I...

Thanks Dave. No rush as I still have to figure out where i'm going to stick this thing. Jim

Hi Dave, looks like a great setup. So my 40 ft deep and 36 ft wide should be good? How high are the doors and the building and what is this building made out of? The weather in Nova Scotia should be close to the same as in Washington, if you are by the water. We may get snow, but it melts in a...

Hi Harry, thants for the info. Can't seem to find how you get pricing on these and it looks like these might be kind of do it yourself, which I can't do. Got any idea when you were looking what they cost and who you see to get one built. It's a long way from Utah to Nova Scotia. Thanks Jim