Search results

photo is a couple of years past but shows trailer

Summer 2023

Summer 2023

Summer 2023

Hi, My 25 is C-Cruiser in the photo album. It very soon will be for sale. My email is dchurch3@comcast.net. Located in Edmonds WA.

i guess one of my questions is does anyone here know the hull construction. When i look in the bilge i see a gray fiberglass surface that has bubbled in one area and I chipped off a piece of it (you can see the missing piece in the photo). It appears to be a thin fiberglass surface. The next...

there is not a crack - just a surface that has cracked

Bob, The water tank is all the way in the stern below the motor well. The crack ends in the picture (between the fuel tank and water tank in an open bilge space and extends under the water tank towards the transom. no idea how far. the sruface layer has definetly delaminated and can easily...

look at my albums last photo for a picture

I know this topic has come up before. I am hoping someone who has dealt with it will contact me so i can get some advice and find out how they handled it. I noticed today (I have a 2007 25' C-Dory) a crack in the fiberglass in the bilge that extends under the water tank (no idea how far back...

IMG 0752

IMG 0740

I think that the 25 is also less rocky from side to side than the 22.

Becareful to make sure the hitch is rated for the weight. A hitch on a half ton may only be rated for a max of 5,000 lbs. My 1/2 ton Tahoe towed it - but I was exceeding the hitch rating and vehicle rating. This could result in the hitch coming off as well as liability for the owner if...

I had a Chevy Tahoe (1/2 Ton) towing my CD-25. I now have a Chevy 3/4 ton HD2500. I was uncomfortable towing with the lighter vehicle.

Jerrell Cove

Running Lights

C-Cruiser finaly has her name installed. Photo taken June 09.

I have a 2007 CD 25. My water pump seems to be making noise when turned on - but is not pumping water. Have any of you had pump failures this soon after purchase? Any suggestions for trouble shooting or am I going to have to replace the pump?