Search results

Family and friends 2095

Family and friends 2020

Family and friends 2079

Family and friends 2088

Family and friends 2013

HUNTING trip Chamberlan South Dekota 2007 038

Long distance shopping - both by phone and internet - we have had great luck with Cabela's. In our expeerience - they have given great backup if we had any problems. Arnold Loose Nut

it took me and my wife 3 years to make the commemented to buy. After our first ride on a 16 ft c-dory We purchesed a 19 angler and this is 5th boat and will probely bee the last I retired from the USN and have been around a few boats and the S-Dory is the best Loos nut

Dotnmarty - We saw your post of this photo a while back, ordered one and put it in. Installation in the C-19 is a little different but no problem. Like you we just used the screws and some sealant, and it works just fine. Most of the strain/weight goes on the feet. And mentally we thank you...

C-Dory group 2008 003

C-Dory group 2008 002

C-Dory group 2008 001

LOOK FOR THE SHUT OFF SWITCH! Our tanks were both pretty low so we decided to put 10 gal in each tank. We pulled into a gas station, my husabnd put 10 gal in the port tank and headed for the rest room. I was putting fuel into the stbrd tank. 10 gal went in, I tried to turn the nozzle off...

Hey Roger - (I gotta rub this in) We may be just a little different but what about us CD 19 folks?? Marcia

Our CD 19+ single axel trailer tips the scale at 3815#. The 04 Honda Pilot pulls it easily - uphill and down. And on slick ramps, the smallish SUV (AWD) draws an occasional dirty look from a pickup owner spinning his wheels. And the Pilot fits the garage.. Happy shopping

PhilR The Loose Nut has a Honda 90 (2007), we went thru the same "surge" thing. :( With a bit if info from the membership here, + Marc @ Wefings, we told our local Honda shop about replacing the fuel control module (its a small electronics thing). He contacted Honda, got the part, installed...

The redlead was for use on steel bulkheads and decks LOOSE NUT

He Bob right on.the only thing i did different after scraping cleaning and painting for 20 years in the good old US Navy was neutralize everything with vinegar before painting with the chromate. Arnold HUFF the owner of LOOSE NUT :roll: