Search results

Yes there is an electric fuel manifold that I have used on the Osprey, Orca and SeaSport lines from IMCO called the "Super Fuel Valve", the part number is SF-206. IMCO is out of California and their number is 800-899-8058. This manifold is mounted at the transom and then wired directly to...

A new Cdory is born

A new Cdory is born

Glassing deck to hull joint

Glassing the deck to hull joint

Deck and hull molds joined

Both the deck and hull molds together so that we can glass the deck to hull joint

If it is just the wheel that is moving on the helm shaft, then loosen the set screw, take the cover cap off and retighten the nut on the shaft. However if the entire shaft is moving then you will need to replace the helm. Let me know if you need part numbers or if you would like more...

Ron, The three piece rail that "Pood" is referring to is really a simple thing, if you look at the picture of the 16' above the "Third" piece of the railing would be the very front of the railing, approximately 10" or so. We call this the bow form on larger rail setups and it allows for the...

Jay, The V-berth cutouts are for extra storage. Thank you for taking the time to look at the pictures. Scott

Another shot of the liner showing the fore and aft supports that I use

One last picture of the liner

Cockpit liner after being laminated to the hull

Roger you are a very wise man, I like the sound of that. I will gladly provide tours of the facility, and I agree we set times ahead of time. I will most assuredly be at the potluck along with Jeff so that we can meet everybody, answer any questions and frankly just simply socialize...

Sounds like we will need to make this event a limited size and VERY scaled back. Good information thank you. Scott

Just put a couple more photos of the 22' that we just finished Gelcoating, note the larger hatch cutouts on the transom.

New cockpit slam hatches for top of deck at transom

Hardtop glassed to deck after gelcoat completed today

Inside the galley, starboard side after gelcoat completed today

Port side cabin deck to hull joint after gelcoat completed today