Search results

Check my pictures on the shelf I built under the electronics folder. There are several others that I viewed by looking at as many pictures from C-Brat photos. Very time consuming but there are several variations that are worth considering before you design your shelf. Since it sounds like you...

All boat wiring should be terminated with a ring terminal when attached to the panel. One cannot use crimp terminals on solid wire. Covers are recommended, if not required, because it can easily corrode in a marine enviornment. I agree with Bob that you should use tinned, stranded wire for...

What diameter and pitch are you turning?

Sea Queen, Regarding your long hydraulic hoses, I would consider replacing them yourself since you feel competent to do so. Once you determine the correct lengths, you can, at least get a price for the new hoses and compare against the fuel cost of two round trips to Oakland. The long hoses...

"Brazo", I have the pictures of where I located my autopilot pump on my photo album. Sorry, but I do not know how to add with my reply. Good luck with your project. By the way, I do not hear either power steering or autopilot pump in the cockpit locations. I elected not to install in my...

Furuno Navnet Radar-Plotter-Fishfinder and Mercury Vessel View Display. Also added stainless Edson Wheel with Power Knob.

SeaStar power steering pump

Autopilot pump underneath starboard coaming box

Autopilot pump mounting

Making ready for door install

Locations for power steering pump and autopilot pump

Inside stbd gunnel for base mounting power steering and autopilot pump

Filler Installed

Installation locations for autopilot and power steering pumps.

Previous front bunks. It was too narrow and put too much pressure on the bottom of the sponsons to load the boat.

Side guides centers the boat as you pull out of the ramp, especially on windy days.

Another view of bow stop and front bunks.

New design for forward end of boat