Search results

Currently in the Sea of Cortez, Garmin e-Charts are way off, Navionics mostly right on. A good local cruising guide with charts of anchorages, approach waypoints and pictures is also very useful. No traditional paper charts on Deja La, I carried them for 15 years on our last sailboat, never used...

My IRA, do you have the 0.5 liter pump with a Seastar or a Baystar?

i have been looking at the EV-150, seems like a perfect fit for the 25 with the ACCU 200 and type 1 pump in the kit, anyone installed one of these yet? Right now I only have the "Mary Pilot" and she is getting tired of it...

You are an endless source of knowledge, thank you.

What are the differences between the Cruise ships and the later 25's?

Just about 33 feet on a LoadRite trailer and with Permatrim on the outboard

There were several house boats there last month along with one of the 'Floating Toilet" near by.

I just finished installing a 40 amp PronauticP, about $320. Plenty to read about that series out there, from 10 Amp to 60 Amp I believe. They are made by Promariner.

We did try to get away from the crowds but you are right, at this time of year it was near impossible. The winds started blowing pretty hard for the last 3 days and would start mid morning til late evening, made it a real challenge to anchor. Got my bow anchor stuck bad a couple times on some...

Thanks for all that , makes sense, I will be at Sea Level in salt water in the future and most likely not back on lake Powell, so maybe i should wait and see how that compares before making a prop decision. At 4500 I was at or very near 19 knts. Sorry for the double posting, don't know what...

I just got back from 10 days or so in Lake Powell, this was my maiden cruise on "deja la". The Yamaha F-150 has a 15 x 15 1/4 alu prop. During the test ride with the PO last November, with a virtually empty boat with only a 1/4 tank of gas we reached 5300 rpm at WOT. i thought that was a bit...

I just got back from 10 days or so in Lake Powell, this was my maiden cruise on "deja la". The Yamaha F-150 has a 15 x 15 1/4 alu prop. During the test ride with the PO last November, with a virtually empty boat with only a 1/4 tank of gas we reached 5300 rpm at WOT. i thought that was a bit...

Boris, I have a Tohatsu 9.8 A3 4stroke. i checked the owner's manual again and and it reads: "if the outboard is to be laid down (for transportation) be sure to drain the fuel and engine oil". I also took another look at the relationship of the kicker's skeg and the trailing edge of the trim...

the main reason i have to want to keep it on the bracket is that the owner's manual says the oil needs to be drained if the motor is to be transported on its side. It is my first 4 stroke kicker and that got my attention, I'd rather not have to do that every time so I'll take the advice of tying...

Boris, i installed the 71091 a few weeks ago and was planning on leaving the 9.8 on while towing. Could you expand a bit on the limitations of doing that? Thanks, AP

I will second the opinion of keeping both the main and the kicker totally independent in terms of fuel and starting. Simplicity of manual start is appealing. Garelick makes a very strong spring loaded bracket that gives you 19 inches of vertical travel, that will allow you to use a short shaft...

Bob & Alicia, I bought the 2 panels on Amazon (where else??) from an outfit called "Discount On-Line Solar Sales, LLC", I paid $154 a piece last January, free shipping. Now, i just checked to see if they were still selling the same panels at the same price and guess what.."not available at this...

I am in the process to install two 120 Watts flexible panels myself, prices have really come down for all that stuff, panels and regulators. I went with the simpler (and cheaper) 20 Amp regulator, seems to work fine. I kept all the cabling to AWG 10 to minimize voltage drop. I have 2 house...

Could someone tell me what the distance in inches is between the Bow Eye and the transom of a C.Dory 25 Cruiser?

Is this boat sold? I am interested. AP