Search results

Where in Alaska? It's a big state!

Prime it. Loosen the nut on the fuel line closest to the burner, pinch the vent line on the tank, turn the system on and compress the tank(assuming it's the plastic 1 gallon type). You should see the line going to the pump fill with fuel, once it gets to the pump, the pump will normally begin...

Mark, Love to help out but I wont be home from deployment until September! Keep in touch though, we're right down the road in Langley. John & Alicia Kassik Scallywag

Any Brats fishing the derby next weekend? Weather's looking good! Two new downriggers, cooler top fillet table done, all I need is some weather! See you on the water! Scallywag [/img]

Well, apparently opinions very, but I like it! Thanks for taking the time to upload the pictures.

You have my attention! Pictures please!

So....got Scallywag back int the water for a little fishing(not catching), made sure my upgrades all worked as planned and just enjoyed some time out on the water! My hard work the past couple of weeks was rewarded with a busted prop! :evil: Sometimes you just can't win. So here I sit checking...

I'd love to play hooky tomorrow but I'll have to see how work goes. Navy has its hooks in for a few more years! We haven't tried Sea J's yet, sounds good. As far as the Whidbey cruise, we're on the South side of the island between Freeland and Langley. Great little harbor in Langley and by...

SleepyC, We'll be at the Boat Show gathering and look forward to meeting the gang! Maybe a meet in the middle Port Townsend run should be in our future, Port Townsend Brewing IPA sounds pretty good about now! John & Alicia Scallywag :beer

Just finnished rewiring, adding a Blue Sea Add a Battery kit, making rails to fit both batteries in the starboard lazerett for and aft, new Cannon downrigger, relocating the Vhf, relocating the raw water washdown panel, adding in a access port to where the port battery cables ran in the port...

Marc, I don't suspect your priming bulb being bad, however when the engine starves itself for fuel, possibly do to a very small air leak or clogged vent line, the bulb would not be pressurized keying us in to a air leak. The "during acceleration" still leads me to think fuel starvation. How...

I cracked the "B" nut at the combustion can, pinched off the vent hose and squeezed the bottle until fluid starts to come out. Retighten "B" nut without relieving pressure and it should work. Mine was installed in 2008 and never used until 2015 and got her to fire up with that method and lots...

Anyone had any luck with Blackmouth lately in 8-1 or 8-2? Hooked a nice wild off Onamac Point and sadly released it while fishing with C-Pearl.... Also....Who's willing to give up some good intel on good places to drop pots in the area still open for crabbing??? Thinking about making a run...

Did you try and prime the fuel bulb right after it died? If so, did it have pressure on it? If not, I would go back to checking fuel lines. Mine did the same, ended up being the connector at the motor.

Excited to meet the crew! We got Scallywag in May and have yet to make a CBGT...100 hours on the boat and have already followed many of your posts rewiring, defunking carbs, and generally setting up ol' Scallywag. We've been a quiet observer, but appreciate all the help we've gotten from your...

I spent most of the 3rd of July trying to get Scallywag sea worthy. Motors would run great for about 5 minutes under power then die out completely. Bulbs ran empty, not flat and wouldn't build pressure. At first I thought it was the fuel filter. Trying to find a Honda filter @ 5pm on the 3rd...