Search results

Just to add on to thataway suspicions and their results with 2 right-hand props: This is a manufacturer's quote below "Standard & Counter Rotation Props Props spin either clockwise (standard or right-hand rotation) or counter-clockwise (counter or left-hand rotation). Most single engines use a...

When using downriggers and 10-12 lb cannon balls, look for a 45 -50 degree angles on your downrigger cables for a speed TTW indicator. They will sing at a certain speed too-- from tension, at least mine do. This is the best guide to speed thru the water. Fish plugs faster than spoons and...

Marty--Re: your--" If you do get the 14 footer I would recommend a couple things, first get a Permatrim for the engine". As I have the 16' Angler I am interested in this comment of yours. C-Dory Angler-s, as you know' are not stern heavy and snapping up on plane is-well- a snap. You seem to...

That's (yes--2 to 2.5ft of water) one of the many good features of the Dory design. I have seen some battle royals with V shaped hulls plus IO drive on poorly designed ramps. I carry a can of silicon spray lubricant and spray the bunks down which lasts for a good long spell. Just be sure you...

Boris you have great posts and you do have an affinity to kelp after all -LOL My home base is in the Pacific northwest - Vancouver Island- so that where I boat. The westcoast of BC is trying to rebuild from an Alaskan transplant process - sea otters. Beautiful little creatures who love kelp. I...

Yikes Boris Lets not wish for the destruction of kelp-- just for a secure anchor site Kelp-Kelp forests are underwater areas with a high density of kelp. They are recognized as one of the most productive and dynamic ecosystems on Earth.[1] Wiki quote

Bob--you have many great posts sharing your knowledge and this is another one. Being a tad bow heavy in a following sea is scary and there is a tendency to here to push the stern around in a bow ballasted vessel. Ballast when added should be around the CG as you know. Trim as you say is best...

IF YOUR OLD ENOUGH -- Artie would say--"very interesting" LOL

All good points and well taken Sunbeam: BTW your comment Re: BIA bolt pattern being standard now--yes and here it is : * means on center The mounting bolt hole pattern standard is: Top pair of holes are spaced 12-7/8" o.c.* The bottom pair of holes are spaced 9-7/8-inch o.c. The spacing between...

Hope your up for a little kidding Sunbeam. I know your method of over-drilling with a refill of thickened epoxy is your recommended method. However, I note your 22' Cruiser was still dry and in good shape after 12? years of water use. And --I think you know that most if not all dealers drill...

All I have always thought that the fewer holes you drill in your transom is an issue worth considering too. That means staying with the same mounting bolt pattern (same make). Secondly-- twin Honda fifties are about 98lbs lighter than twin F50 Yamaha-s. Further the Honda high compression engine...

I little pricy - but thanks for the heads up as to where to get one Bill. Geoff

I too find Rain-X an excellent product. Tell me though where I might get A MANUAL wiper assemble for my wife who would like to see-too

Loved your answer --you must have old bark on you too. Yes standing to be able to overcome a high gunnels and get your oars in the water is as old as the Venice Gondoliers and no doubt back further to the days of Christ on the Nile. But oars are long and heavy and then oars locks etc., not a...

Harvey - I LOL about the small single engine aircraft comparison to a single engine boat. Makes one think--eh. I had my private pilots license and flew small single engine aircraft in my youth and never gave it too much thought. Well-- at times, some thought, if the engine coughed a bit, then...

Let me define our philosophy in this concept I present here: My wife and I are minimalists and therefore we look to simplify our boating concepts and offer this idea to those like minded. I have a great Yamaha 6HP trolling motor and or backup power, that never gets used, since I re-powered...

Yes Dave, there are many stories of vehicles or tires not up to the road. I personally am not worried about my Jeep Liberty diesel, but the trailer and boat are always a concern of course. What about Poett's Nook - would this not cut off about 10 miles of dust choking washboard?