Front middle window

Thank you. I had seen very little printed of practical use, but this window brace was an escellent use of the technology. No worry, too late in life, and nothing I need to print.

I have a 2002 CD-22 and the brace never worked very well. Took the winged thig-a-majig off and replaced it with a galvanized iron pipe (I'm lucky, very little rusting on Lake Superior) coupling that was female threaded and a perfect fit to the threads on the brace's fixed shaft. I drilled radially into the side of the coupling and threaded that hole and screwed a stud with a plastic handle (got it from all those rows of draws (with all kinds of odd little parts) at the hardware store). The stud screws against the sliding shaft of the brace and holds well in any position. Sorry no picture but I could get one but not right away as the boat is in storage 25 miles away.
Jay

Maybe a helpful picture. Go to the C-Green album picture #23 and you can see the three pronged plastic handle of the stud at the bottom of the brace.
Jay