Ball screwed onto mounting nut.

Ball screwed onto mounting nut.

  • Media owner Swee Pea
  • Date added Jul 29, 2007
  • Reaction score 0
  • Comments 0
Garhauer Davit ball mount is screwed through floorboards and into mounting plate underneath.

Garhauer Davit ball mount is screwed through floorboards and into mounting plate underneath.

  • Media owner Swee Pea
  • Date added Jul 29, 2007
  • Reaction score 0
  • Comments 0
Backing plate to be mounted under floorboards. I drilled holes to accomodate stainless tee nuts and welded to underside of backer plate.

Backing plate to be mounted under floorboards. I drilled holes to accomodate stainless tee nuts and welded to underside of backer plate.

  • Media owner Swee Pea
  • Date added Jul 29, 2007
  • Reaction score 0
  • Comments 0
Bottom view of factory floorboards. Holes were coated with epoxy.

Bottom view of factory floorboards. Holes were coated with epoxy.

  • Media owner Swee Pea
  • Date added Jul 29, 2007
  • Reaction score 0
  • Comments 0
Drilled holes in the factory floorboards to accomodate the Garhaurer Davit ball mount.

Drilled holes in the factory floorboards to accomodate the Garhaurer Davit ball mount.

  • Media owner Swee Pea
  • Date added Jul 29, 2007
  • Reaction score 0
  • Comments 0
With this flush tank bag, there is a constant supply of fresh water. You can see if there is an interruption of water from the hose. Thanks to the Brats for directing me to this accessory.

With this flush tank bag, there is a constant supply of fresh water. You can see if there is an interruption of water from the hose. Thanks to the Brats for directing me to this accessory.

  • Media owner Swee Pea
  • Date added Jul 18, 2007
  • Reaction score 0
  • Comments 0
Clean fresh water flush.

Clean fresh water flush.

  • Media owner Swee Pea
  • Date added Jul 18, 2007
  • Reaction score 0
  • Comments 0
Engine started right up.

Engine started right up.

  • Media owner Swee Pea
  • Date added Jul 18, 2007
  • Reaction score 0
  • Comments 0
Checking the Honda 90 before we take Swee Pea out.

Checking the Honda 90 before we take Swee Pea out.

  • Media owner Swee Pea
  • Date added Jul 18, 2007
  • Reaction score 0
  • Comments 0
Another view of Swee Pea with the trailer removed. A one man job.

Another view of Swee Pea with the trailer removed. A one man job.

  • Media owner Swee Pea
  • Date added Jul 4, 2007
  • Reaction score 0
  • Comments 0
Trailer now removed. Will be applying bottom "wax" from Aurora Products.

Trailer now removed. Will be applying bottom "wax" from Aurora Products.

  • Media owner Swee Pea
  • Date added Jul 4, 2007
  • Reaction score 0
  • Comments 0
Using the G&G boat lift. Attached to bow eye, lifted the boat off the trailer

Using the G&G boat lift. Attached to bow eye, lifted the boat off the trailer

  • Media owner Swee Pea
  • Date added Jul 4, 2007
  • Reaction score 0
  • Comments 0
Removing the trailer; jack stands in place

Removing the trailer; jack stands in place

  • Media owner Swee Pea
  • Date added Jul 4, 2007
  • Reaction score 0
  • Comments 0
I'm satisfied.

I'm satisfied.

  • Media owner Swee Pea
  • Date added Apr 10, 2007
  • Reaction score 0
  • Comments 0
Kicker full up, tilted in its second position. It can be tilted full up, but its close. Needed the room between the main because a sharp turn would have the main striking the tiller handle on the kicker.

Kicker full up, tilted in its second position. It can be tilted full up, but its close. Needed the room between the main because a sharp turn would have the main striking the tiller handle on the kicker.

  • Media owner Swee Pea
  • Date added Apr 10, 2007
  • Reaction score 0
  • Comments 0
I plan to attach a rod from the main to the kicker. This way I can steer from the helm. I have pretty good access to the kicker from the cockpit.

I plan to attach a rod from the main to the kicker. This way I can steer from the helm. I have pretty good access to the kicker from the cockpit.

  • Media owner Swee Pea
  • Date added Apr 10, 2007
  • Reaction score 0
  • Comments 0
Had to slightly reroute the trim tab line.

Had to slightly reroute the trim tab line.

  • Media owner Swee Pea
  • Date added Apr 10, 2007
  • Reaction score 0
  • Comments 0
The Fulton mount will lower the kicker 14 1/2 inches, placing the prop at the proper height.

The Fulton mount will lower the kicker 14 1/2 inches, placing the prop at the proper height.

  • Media owner Swee Pea
  • Date added Apr 10, 2007
  • Reaction score 0
  • Comments 0
The Fulton motor mount slides into the mount bracket. When not in use, we can remove the motor mount all together and keep the uncluttered look.

The Fulton motor mount slides into the mount bracket. When not in use, we can remove the motor mount all together and keep the uncluttered look.

  • Media owner Swee Pea
  • Date added Apr 10, 2007
  • Reaction score 0
  • Comments 0
Yes, it was necessary to move the gas tank forward before drilling. Careful, careful, careful.

Yes, it was necessary to move the gas tank forward before drilling. Careful, careful, careful.

  • Media owner Swee Pea
  • Date added Apr 10, 2007
  • Reaction score 0
  • Comments 0
Ouch!

Ouch!

  • Media owner Swee Pea
  • Date added Apr 10, 2007
  • Reaction score 0
  • Comments 0
Must clear the trim tab. Must not interfere witht the main. Must tilt up. This position is a little far to the starboard side, but with the kicker raised, will work.

Must clear the trim tab. Must not interfere witht the main. Must tilt up. This position is a little far to the starboard side, but with the kicker raised, will work.

  • Media owner Swee Pea
  • Date added Apr 10, 2007
  • Reaction score 0
  • Comments 0
We are using a Fulton mount, but I want to use a mounting plate to mount the kicker mount. The mount and motor slides into this low profile mount. Make sense?

We are using a Fulton mount, but I want to use a mounting plate to mount the kicker mount. The mount and motor slides into this low profile mount. Make sense?

  • Media owner Swee Pea
  • Date added Apr 10, 2007
  • Reaction score 0
  • Comments 0
My buddy Charlie, a professional boat mechanic. We need to make sure that there is clearance between the main and the kicker.

My buddy Charlie, a professional boat mechanic. We need to make sure that there is clearance between the main and the kicker.

  • Media owner Swee Pea
  • Date added Apr 10, 2007
  • Reaction score 0
  • Comments 0
S

Not an original photo of Swee Pea, but her twin.

  • Items 157
  • Album owner Swee Pea
  • Date created
Swee Pea
Click to expand...
There are no comments to display.

Album information

Category
Swee Pea
Album owner
Swee Pea
Date created
Item count
157
View count
19,943
Comment count
0
Rating
0.00 star(s) 0 ratings

Album privacy

S

Swee Pea

Media items
157
Albums
1
Can view media items
Inherited from category
Can add media items
Album owner only

Share this album

Back
Top