• Reaction score 0
  • Comments 0

  • Reaction score 0
  • Comments 0

  • Reaction score 0
  • Comments 0

  • Reaction score 0
  • Comments 0

  • Reaction score 0
  • Comments 0
Installing the table hinges. Part of the table rests on the crossmember. The stick is just to ensure it's all level before I screw the hinges to the teak hinge mounts.

Installing the table hinges. Part of the table rests on the crossmember. The stick is just to ensure it's all level before I screw the hinges to the teak hinge mounts.

  • Reaction score 0
  • Comments 0

  • Reaction score 0
  • Comments 0

  • Reaction score 0
  • Comments 0
With a heat gun, I bent a piece of flexible molding around the table for the rocking lip. Used a nail gun to hold it in place. Then putty for the nail holes.

With a heat gun, I bent a piece of flexible molding around the table for the rocking lip. Used a nail gun to hold it in place. Then putty for the nail holes.

  • Reaction score 0
  • Comments 0
Since I have trouble getting marks/stains off of starboard, I laminated the table with the same white laminate I used in the cabin around the sink/stove.

Since I have trouble getting marks/stains off of starboard, I laminated the table with the same white laminate I used in the cabin around the sink/stove.

  • Reaction score 0
  • Comments 0

  • Reaction score 0
  • Comments 0
Hinges with 3 coats of spar varnish on the supports. Ready to be mounted.

Hinges with 3 coats of spar varnish on the supports. Ready to be mounted.

  • Reaction score 0
  • Comments 0

  • Reaction score 0
  • Comments 0
Table is made from starboard.

Table is made from starboard.

  • Reaction score 0
  • Comments 0
Since the hinge supports hold the wires up, no need for the screws for the old wire holders so I gel coated the screw holes.

Since the hinge supports hold the wires up, no need for the screws for the old wire holders so I gel coated the screw holes.

  • Reaction score 0
  • Comments 0

  • Reaction score 0
  • Comments 0

  • Reaction score 0
  • Comments 0
Fitting the hinges for the table. The wires that run athawartships between house and engine batteries fit nicely on top of the hinge supports.

Fitting the hinges for the table. The wires that run athawartships between house and engine batteries fit nicely on top of the hinge supports.

  • Reaction score 0
  • Comments 0
The seats are actually the old hatch cover from inside on the port side.

The seats are actually the old hatch cover from inside on the port side.

  • Reaction score 0
  • Comments 0
The steps are removable and can be mounted either to port or starboard.

The steps are removable and can be mounted either to port or starboard.

  • Reaction score 0
  • Comments 0

  • Reaction score 0
  • Comments 0

  • Reaction score 0
  • Comments 0

  • Reaction score 0
  • Comments 0
3 bolts with large washers hold the seats on.

3 bolts with large washers hold the seats on.

  • Reaction score 0
  • Comments 0
C

Hinge wood supports made from an old teak deck chair.

  • Items 54
  • Album owner CaptainJeff
  • Date created
Cockpit Seating
Click to expand...
There are no comments to display.

Album information

Category
Cockpit Seating and Table Installation
Album owner
CaptainJeff
Date created
Item count
54
View count
1,663
Comment count
0
Rating
0.00 star(s) 0 ratings

Album privacy

C

CaptainJeff

Media items
417
Albums
5
Can view media items
Inherited from category
Can add media items
Album owner only

Share this album

Back
Top