| View previous topic :: View next topic |
| Author |
Message |
Jack in Alaska
Joined: 17 Aug 2004
Posts: 1190
City/Region: Anchorage/Ninilchik
State or Province: AK
C-Dory Year: 2005
C-Dory Model: 26 Pro Angler
Vessel Name: HIGH TIDE II
Photos: HIGH TIDE II
|
 Posted: Fri Sep 28, 2007 2:57 pm Post subject: Vintage Angler for sale..!! |
 |
|
Saw a 1982 22' Angler (classic) with a 85 hp Yahmaha 2 stroke and a newer EZ Loader bunk trailer, with side bunks, for sale in Anchorage. Also hass some vintage electronics. Also has a partial canopy over the rear deck. Parked in front of the West Marine store on Diamond Blvd..
It is very good condition and priced at $19,900. Probably a little on the high side but that is what barganing is for.
FYI...........
_________________
On the HIGH TIDE-II, wife Carolyn and I.....Another summer fishing on the HIGH TIDE II in the Cook Inlet at Cape Ninilchik, Alaska.
HIGH TIDE-II; 2005 26' ProAngler; 2003 200 Honda / 2009 9.9 Honda high thrust
No. CD026021I405; AK-5008-AK
MSSI No. 338143486(cancelled)
HIGH TIDE; 1983 Angler Classic 22'; 90 Honda/ 9.9 Tohatsu-sold 2009 to son Dan (flatfishfool)
Stolen & stripped in Aug. 18
Bare hull & trailer sold in Nov. |
|
| Back to top |
|
 |
Sea Wolf
Joined: 01 Nov 2003
Posts: 8650
City/Region: Redding
State or Province: CA
C-Dory Year: 1987
C-Dory Model: 22 Cruiser
Vessel Name: Sea Wolf
Photos: Sea Wolf
|
| Posted: Sat Sep 29, 2007 1:12 am Post subject: |
|
|
Jack-
That a bunch for posting this listing for all C-Brats and wannabe's to take note of and consider!
I'll just add a note that this 1982 C-Dory 22 is a "Classic" and not the more recent "Angler", a distinction sometimes not made.
We recently discussed the difference near the bottom of page one of the Angler vs. Cruiser thread.
Thanks again for your timely post!
Joe.
_________________
Sea Wolf, C-Brat #31
Lake Shasta, California
  
"Most of my money I spent on boats and women. The rest I squandered'. " -Annonymous |
|
| Back to top |
|
|
RJD Wannabe
Joined: 16 Jun 2007
Posts: 244
City/Region: Elk Grove
State or Province: CA
|
| Posted: Sat Sep 29, 2007 11:24 am Post subject: |
|
|
??Too good to be true??
1995 22 Angler $15,000 on Boat Trader
here is link, I haven't figured out images yet.
Too bad I have to wait, even if it needs work and a new engine.
http://adcache.boattraderonline.com/6/2/3/90035423.htm
_________________
Soon to join C-Dory owners |
|
| Back to top |
|
|
snal
Joined: 13 Aug 2006
Posts: 524
City/Region: Asheville
State or Province: NC
C-Dory Year: 1994
C-Dory Model: 22 Angler
Vessel Name: Thelma Lou
Photos: Thelma Lou
|
| Posted: Sat Sep 29, 2007 12:45 pm Post subject: |
|
|
Is it just the Angler versions that seem to be priced very reasonably? We gave 17K for our 94 22 Angler with twin 94 honda 45's (342 hours) and a new trailer two months ago...and we're tickled pink!
_________________
Snal~
(Larry and Jo)
1994 C Dory 22 Angler (sold 2012)
Currently looking for a steal of a deal on a 25' "Thelma Lou II" |
|
| Back to top |
|
|
RJD Wannabe
Joined: 16 Jun 2007
Posts: 244
City/Region: Elk Grove
State or Province: CA
|
| Posted: Sat Sep 29, 2007 3:10 pm Post subject: |
|
|
I would be (tickled pink) too!! Hopefully me in a year.
Anyone know, can the full glass door be added to an older angler?? |
|
| Back to top |
|
|
Sea Wolf
Joined: 01 Nov 2003
Posts: 8650
City/Region: Redding
State or Province: CA
C-Dory Year: 1987
C-Dory Model: 22 Cruiser
Vessel Name: Sea Wolf
Photos: Sea Wolf
|
| Posted: Sun Sep 30, 2007 1:46 am Post subject: |
|
|
| RJD Wannabe wrote: | (Stuff clipped)
Anyone know, can the full glass door be added to an older angler?? |
I don't see why not, but there may well be some customization necessary.
The glass door, is of course, plastic, probably Lexan or similar.
The dimensions of the new boats and the old may or may not be the same for the height and width, and the thickness required may be different in the way the door well is designed.
Nonetheless, I'm sure it can be done.
I'd first check the dimensions, and then see if there are any hardware differences that would be difficult to accomodate.
I'd next contact the factory to see if they think one of the new doors would work, and, if so, what the $$$ would be. (Don't be surprised if it is several hundred dollars, maybe $500 or more.)
I'd then make an elaborate and detailed drawing of the door required, and take it to several plastic fabricators to get a cost estimate for comparison. We have a "Tap Plastics" outfit here in California that could do it easily.
You might think that you could simply buy a sheet or sheet portion of plastic and make the door yourself, but it's harder to work in these plastics than most folks realize. Cutting and boring tools must be razor sharp to cut cleanly, otherwise they chew through and melt the plastic, making a mess. Polishing plastics requires some specific knowledge of the appropriate procedures and compounds. You can also scratch through the protective coating on the new plastic sheet and ruin the appearance of your new project.
You'll possibly have to change or modify the door hinges and lock mechanisms in the process, too.
IDEA: HOW ABOUT A DUTCH DOOR FOR THE CABIN WITH A FULL WOOD FRAME AND CLEAR LEXAN CENTER WINDOWS IN THE TOP AND BOTTOM? YOU COULD MAKE IT FROM TEAK OR SOME OTHER EXOTIC WOOD AND MAKE THE CLEAR WINDOW CENTERS OVAL/NAUTICAL SHAPED. SANDBLAST A NAUTICAL PATTERN/BORDER IN THE WINDOWS. OR MAKE A WINDOW THAT SLIDES OPEN WITH OR WITHOUT A SCREEN. HOW ABOUT A PRIVACY CURTAIN? ETC., ETC.
JOE. |
|
| Back to top |
|
|
Doryman
Joined: 03 Oct 2006
Posts: 3807
City/Region: Anacortes
State or Province: WA
C-Dory Year: 2006
C-Dory Model: 255 Tomcat
Vessel Name: Lori Ann
Photos: Lori Ann
|
| Posted: Sun Sep 30, 2007 6:54 pm Post subject: |
|
|
| RJD Wannabe wrote: | | Anyone know, can the full glass door be added to an older angler?? |
Check out what Diamond SeaGlaze has in stock -- you might be able to adapt one of their doors.
Warren
_________________
Doryman
M/V Lori Ann
TomCat 255, Hull #55, 150 Yamahas
Anacortes, WA
 |
|
| Back to top |
|
|
RJD Wannabe
Joined: 16 Jun 2007
Posts: 244
City/Region: Elk Grove
State or Province: CA
|
| Posted: Sun Sep 30, 2007 9:11 pm Post subject: |
|
|
| Thanks, that would be the easiest!! |
|
| Back to top |
|
|
ripple
Joined: 07 Feb 2007
Posts: 65
City/Region: Mill Valley
State or Province: CA
C-Dory Year: 2006
C-Dory Model: 22 Cruiser
Vessel Name: Ripple
Photos: Ripple
|
| Posted: Sun Sep 30, 2007 9:17 pm Post subject: |
|
|
| The glass door is definitely not lexan or any plastic. It is glass in a powdercoated aluminum frame. I have a 2006 cruiser with the full glass door . I really like the clean look, but it does not provide any privacy in the cabin. |
|
| Back to top |
|
|
|
Search
Private Messages
Profile
Log in
Register
Help
