tilt gauge not functioning

G

gary allen

New member
I have twin Honda 50s and noticed yesterday that the port tilt (showing the position of the motor) gauge is not working. Most likely due to a bad connection at the battery?

Thanks for the help.
 
Gary,
On my Honda 75, I had the same problem. The plastic spring loaded bracket that is between the engine and the mounting bracket has a tendency to bind up over time. I just used some WD 40 on it to free it up and the gauge then read correctly.

Tad
 
I had the same problem on my twin 40's. Tilt the engine all the way up, then look to the left of the hydraulic shaft and you should see about a 3" long black plastic arm with a spring around it's base. That is the tilt sensor arm. Les Lampman explained all this to me and told me to lubricate that area frequently. I do...problem solved.
 
Back
Top