Okay--I've ordered two new twenty-gallon tanks from C-Dory. They told me the rumored 25-gallon tanks aren't gonna happen, at least any time soon, so I decided to go with what they have. Next, today being clear and sunny, and spring's coming and all, I went out to the boat, on the trailer to follow directions given in OWTO, Chapter 1--I disconnected the fuel line from the engine, took the end fitting off, dropped the end into a container on the ground--and began pumping. I tried pumping with my finger over the end of the fuel line, blocking the hole. I tried pumping while I covered the fuel tank vent, then realized that didn't make much difference. I pumped with my left hand. I pumped with my right hand. I moved my fuel tank selector around and tried other positions. I pumped til I was various colors in the face.
Question--and realize, you're communicating with a total brick, a man legendary for his lunkheadedness, at this end--exactly how much pumping is required to start a flow using the disconnect the fuel line from the engine--remove fitting--place in container--and pump technique? Am I missing something? Thanks in advance.
Question--and realize, you're communicating with a total brick, a man legendary for his lunkheadedness, at this end--exactly how much pumping is required to start a flow using the disconnect the fuel line from the engine--remove fitting--place in container--and pump technique? Am I missing something? Thanks in advance.