J joc1212 New member Sep 14, 2018 #1 The position indicator lights on the Bennett Trim tabs are not working...(not lighting up) Does anyone have any ideas where to start looking to fix this. I'm very new to the C Dory and can use all the advise I can get. Thanks in advance...
The position indicator lights on the Bennett Trim tabs are not working...(not lighting up) Does anyone have any ideas where to start looking to fix this. I'm very new to the C Dory and can use all the advise I can get. Thanks in advance...
B BrentB New member Sep 14, 2018 #2 I would ask TabMan at http://www.thehulltruth.com/tabmans-tri ... ussion-15/ _________________
S ssobol Active member Sep 14, 2018 #3 Sure the brightness is turned up? My tab indicator lights default to very dim when first powered up. I have to increase the brightness quite a lot to see them in daylight. Wish I could set the default to a higher value.
Sure the brightness is turned up? My tab indicator lights default to very dim when first powered up. I have to increase the brightness quite a lot to see them in daylight. Wish I could set the default to a higher value.
J journey on New member Sep 15, 2018 #4 Check to see if the trim tabs go down. The pump may not be working. Also check to see if you're getting power to the lights. Those are the first places I'd look. Boris
Check to see if the trim tabs go down. The pump may not be working. Also check to see if you're getting power to the lights. Those are the first places I'd look. Boris
