Search results

  1. Side view

    Side view

    No description
  2. Another angle of the Head floor

    Another angle of the Head floor

    Another angle of the Head floor
  3. Just the center piece in the head. The two sides have been removed

    Just the center piece in the head. The two sides have been removed

    Just the center piece in the head. The two sides have been removed
  4. Rear cockpit seat

    Rear cockpit seat

    Rear cockpit seat
  5. Rear cockpit seat. The pull ring is mortised into the top.

    Rear cockpit seat. The pull ring is mortised into the top.

    Rear cockpit seat. The pull ring is mortised into the top.
  6. Small 12volt lawnmower battery, that plugs and plays to run the aerator. The raw water wash down fills the well. The aerator oxygenates the water. When water is added, the extra runs out the overflow, and into the cockpit drain.r

    Small 12volt lawnmower battery, that plugs and plays to run the aerator. The raw water wash down fills the well. The aerator oxygenates the water. When water is added, the extra runs out the overflow, and into the cockpit drain.r

    Small 12volt lawnmower battery, that plugs and plays to run the aerator. The raw water wash down fills the well. The aerator oxygenates the water. When water is added, the extra runs out the overflow, and into the cockpit drain.r
  7. starboard side of three piece head floor

    starboard side of three piece head floor

    starboard side of three piece head floor
  8. Another angle. The ribs step up in height, to allow for the sloping floor. It makes for a flat floor in the Head. Three screws hold each outside piece to the center. The two wings are removed, and then the center is lifted out.

    Another angle. The ribs step up in height, to allow for the sloping floor. It makes for a flat floor in the Head. Three screws hold each outside piece to the center. The two wings are removed, and then the center is lifted out.

    Another angle. The ribs step up in height, to allow for the sloping floor. It makes for a flat floor in the Head. Three screws hold each outside piece to the center. The two wings are removed, and then the center is lifted out.
  9. Tackle storage

    Tackle storage

    Tackle storage
  10. Head floor

    Head floor

    Head floor
  11. Tackle storage

    Tackle storage

    Tackle storage
  12. Magna bait table. I made a new holder. The original plastic broke.

    Magna bait table. I made a new holder. The original plastic broke.

    Magna bait table. I made a new holder. The original plastic broke.
  13. Magna bracket by itself.

    Magna bracket by itself.

    Magna bracket by itself.
  14. Tackle locker

    Tackle locker

    Tackle locker
  15. Inside plumbing. Kodiak kit for live wells was used and modded for the cooler

    Inside plumbing. Kodiak kit for live wells was used and modded for the cooler

    Inside plumbing. Kodiak kit for live wells was used and modded for the cooler
  16. The supply hose. The flat blue hose is the drain. It slips into the cockpit drain in the back corner. The supply hose is filled from the raw water wash down, via a hose "Y".

    The supply hose. The flat blue hose is the drain. It slips into the cockpit drain in the back corner. The supply hose is filled from the raw water wash down, via a hose "Y".

    The supply hose. The flat blue hose is the drain. It slips into the cockpit drain in the back corner. The supply hose is filled from the raw water wash down, via a hose "Y".
  17. Portable live well

    Portable live well

    Portable live well
  18. Rear cockpit seat

    Rear cockpit seat

    Rear cockpit seat
  19. Rear cockpit seat

    Rear cockpit seat

    Rear cockpit seat
  20. Rear cockpit seat. Raised so a Honda 2000 gen would sit inside, with the lid closed

    Rear cockpit seat. Raised so a Honda 2000 gen would sit inside, with the lid closed

    Rear cockpit seat. Raised so a Honda 2000 gen would sit inside, with the lid closed
Back
Top