Search results

  1.

    • CaptainJeff
    • Media item
    • Comments: 0
    • Album: Hinge wood supports made from an old teak deck chair.
    • Category: Cockpit Seating and Table Installation
  2. Hinges with 3 coats of spar varnish on the supports. Ready to be mounted.

    Hinges with 3 coats of spar varnish on the supports. Ready to be mounted.

    Hinges with 3 coats of spar varnish on the supports. Ready to be mounted.
    • CaptainJeff
    • Media item
    • Comments: 0
    • Album: Hinge wood supports made from an old teak deck chair.
    • Category: Cockpit Seating and Table Installation
  3.

    • CaptainJeff
    • Media item
    • Comments: 0
    • Album: Hinge wood supports made from an old teak deck chair.
    • Category: Cockpit Seating and Table Installation
  4. Table is made from starboard.

    Table is made from starboard.

    Table is made from starboard.
    • CaptainJeff
    • Media item
    • Comments: 0
    • Album: Hinge wood supports made from an old teak deck chair.
    • Category: Cockpit Seating and Table Installation
  5. Since the hinge supports hold the wires up, no need for the screws for the old wire holders so I gel coated the screw holes.

    Since the hinge supports hold the wires up, no need for the screws for the old wire holders so I gel coated the screw holes.

    Since the hinge supports hold the wires up, no need for the screws for the old wire holders so I gel coated the screw holes.
    • CaptainJeff
    • Media item
    • Comments: 0
    • Album: Hinge wood supports made from an old teak deck chair.
    • Category: Cockpit Seating and Table Installation
  6.

    • CaptainJeff
    • Media item
    • Comments: 0
    • Album: Hinge wood supports made from an old teak deck chair.
    • Category: Cockpit Seating and Table Installation
  7.

    • CaptainJeff
    • Media item
    • Comments: 0
    • Album: Hinge wood supports made from an old teak deck chair.
    • Category: Cockpit Seating and Table Installation
  8. Fitting the hinges for the table. The wires that run athawartships between house and engine batteries fit nicely on top of the hinge supports.

    Fitting the hinges for the table. The wires that run athawartships between house and engine batteries fit nicely on top of the hinge supports.

    Fitting the hinges for the table. The wires that run athawartships between house and engine batteries fit nicely on top of the hinge supports.
    • CaptainJeff
    • Media item
    • Comments: 0
    • Album: Hinge wood supports made from an old teak deck chair.
    • Category: Cockpit Seating and Table Installation
  9. 4 inch hole saw to begin the installation. Wanted it mounted as far aft as possible.

    4 inch hole saw to begin the installation. Wanted it mounted as far aft as possible.

    • CaptainJeff
    • Album
    • Comments: 0
    • Category: Shoot Through The Hull Transducer Installation
  10. October 2017 131

    October 2017 131

    Storage/Water Tank Install/Keel Screw Leak Repair
    • CaptainJeff
    • Album
    • Comments: 0
    • Category: V-Berth Modifications
  11. Potable water hose bib installed, connected to water pump in the V-berth, used for rinsing off feet after beach combing.

    Potable water hose bib installed, connected to water pump in the V-berth, used for rinsing off feet after beach combing.

    Potable water hose bib installed, connected to water pump in the V-berth, used for rinsing off feet after beach combing.
    • CaptainJeff
    • Media item
    • Comments: 0
    • Album: October 2017 131
    • Category: V-Berth Modifications
  12.

    • CaptainJeff
    • Media item
    • Comments: 0
    • Album: 4 inch hole saw to begin the installation. Wanted it mounted as far aft as possible.
    • Category: Shoot Through The Hull Transducer Installation
  13. Finished project.

    Finished project.

    Finished project.
    • CaptainJeff
    • Media item
    • Comments: 0
    • Album: 4 inch hole saw to begin the installation. Wanted it mounted as far aft as possible.
    • Category: Shoot Through The Hull Transducer Installation
  14.

    • CaptainJeff
    • Media item
    • Comments: 0
    • Album: 4 inch hole saw to begin the installation. Wanted it mounted as far aft as possible.
    • Category: Shoot Through The Hull Transducer Installation
  15. No more transom mounted transponder.

    No more transom mounted transponder.

    No more transom mounted transponder.
    • CaptainJeff
    • Media item
    • Comments: 0
    • Album: 4 inch hole saw to begin the installation. Wanted it mounted as far aft as possible.
    • Category: Shoot Through The Hull Transducer Installation
  16. Transponder installed.

    Transponder installed.

    Transponder installed.
    • CaptainJeff
    • Media item
    • Comments: 0
    • Album: 4 inch hole saw to begin the installation. Wanted it mounted as far aft as possible.
    • Category: Shoot Through The Hull Transducer Installation
  17. Vaseline around the O ring on the transponder.

    Vaseline around the O ring on the transponder.

    Vaseline around the O ring on the transponder.
    • CaptainJeff
    • Media item
    • Comments: 0
    • Album: 4 inch hole saw to begin the installation. Wanted it mounted as far aft as possible.
    • Category: Shoot Through The Hull Transducer Installation
  18. Adding RV antifreeze to the transponder base.

    Adding RV antifreeze to the transponder base.

    Adding RV antifreeze to the transponder base.
    • CaptainJeff
    • Media item
    • Comments: 0
    • Album: 4 inch hole saw to begin the installation. Wanted it mounted as far aft as possible.
    • Category: Shoot Through The Hull Transducer Installation
  19.

    • CaptainJeff
    • Media item
    • Comments: 0
    • Album: 4 inch hole saw to begin the installation. Wanted it mounted as far aft as possible.
    • Category: Shoot Through The Hull Transducer Installation
  20.

    • CaptainJeff
    • Media item
    • Comments: 0
    • Album: 4 inch hole saw to begin the installation. Wanted it mounted as far aft as possible.
    • Category: Shoot Through The Hull Transducer Installation
Back
Top