Search results

Here is a question, can you run your boat on the trailer just using the flush port/ water hose . I always have trouble using the muffs since they are always sliding all over and is there a way to secure the muffs to keep them in place. Thanks.

Hopefully mine will last a few more years. I have always wanted a Suzuki DF90 on my boat , it would match my boat perfectly.

I brought my boat/ motor in for some general maintenance today . My motor was running strong with no issues but I thought it wouldn't hurt. I had bought some parts online from Browns Point Marine for my Suzuki 1999 DF 70. I replaced the timing belt, replaced the High Pressure and inline fuel...

My Suzuki 90 HP sits on the transom and the cavitation plate is level with the bottom. I just checked, the top bolt is in the top hole of the top four hole pattern and the bottom bolt is in the top hole of the bottom four bolt pattern. Bolt hole patterns are not standard for all motors. I have...

My Suzuki 90 HP sits on top of my transom and every other boat that I owned did the same. To my way of thinking if the motor doesn't sit on the transom there's something wrong. I may be wrong but he only way this might happen is that the motor installer is using the same holes from a different...

Yours is even better , great album also. Thanks.

This really is a nice boat, I didn't know they made a commercial 27 foot C-Dory.

hardee...the light I was referring to was the little light just above the cabin door . it to is prone to water leakage. I leave the pole light in the connector when my boat is at the marina and remove it when I am towing also. Thanks for the tip about the Pole light , good idea. Tug

Today, I finally fixed and got my navigational lights working again. I ended up " Up-Grading " the original switch with a SeaChoice 4 connector Push- Pull switch. The problem as suspected was the wiring form the Richie Compass that had been ripped out. I tested each connector at a time with...

I ended up ordering a Sea-Dog 3-connector push-pull switch. It was all that I could find on Amazon.ca and shipping was free. If I ordered from the States shipping costs for a 4-connector switch was around $ 30.00 and I am not sure when I would get it . Some places won't even ship to Canada...

I ended up removing the Navigation Switch this morning. Turns out it was a 4-connector Perko Switch. When I tried to remove the screw from one of the connectors a piece came off from the back of the switch. I have an elastic holding it together in the picture I posted. Two connector was...

Perko 4-Position Push Pull Navigational Switch

I will try cleaning and sanding the switches terminals first . If that doesn't work I will just replace the Navigational switch. It's a pain trying to find a short, every wire must have a couple of pin holes in them by now. I can't go walleye fishing at night until I get the lights working...

I just posted a picture of a 3-positional navigation switch that I found on-line. Is it as easy as swapping the new for the old or is there anything else I should be aware of like compatible amps and voltage or are these universal and fit all models.

3-position navigation switch

I just came back for my boat trying exactly that. No luck, I think I will remove the navigation switch from the boat and clean and sand all the connections. I would like to just replace the navigation switch with a new one . ( in case it's faulty ). but I have no idea if they still make or...

The other night I went to turn on my navigation lights and nothing worked. See pictures I just posted. The rocker panel navigation light comes on but when I pull out the knob to activate the running lights but the fuse blows. I have power to the back of the rocker panel and one of the three...

Back Side of Navigation Knob Box Right Side Back Side of Rocker Panel Left Side

Rocker Panel Right Side Navigation Knob Left SWide

Back Side of Rocker Panel