olekils's latest activity

  • olekils
    olekils reacted to cmetzenberg's post in the thread repair rub rail with Like Like.
    on my tomcat the rivet backs aren't accessible. I figure those lag bolts will hold forever, especially considering i butter them up with...
  • olekils
    olekils replied to the thread repair rub rail.
    I had a similar issue when trying to drill out my rivets. One option is having a helper inside holding the rivet with pliers, another...
  • olekils
    olekils replied to the thread Repair/Replace Gunwale Wood.
    I had a similar issue on my boat where the core was not properly sealed and had some moisture damage around the rod holders as well as...
    • Screenshot 2026-05-18 102046.jpg
    • IMG_6101.jpeg
    • Filled with Epoxy.jpg
    • Stepped Back Core.jpg
    • Screenshot 2026-05-18 102128.jpg
  • olekils
    We've had a 4m Truekit Discovery for about five years and are very happy with it. Most of our trips are from Santa Barbara across to...
  • olekils
    My boat had the rubrail swoop down near the transom along the hull and deck joint causing water to spray around and not looking super...
    • IMG_6150.jpeg
    • Rubrail 2.jpg
    • Rubrail1.jpg
  • olekils
    olekils reacted to Flashman's post in the thread Tomcat 24 with Suzuki 140s? with Like Like.
    Ya, it's a big project for sure. Diesel tank is for the Wallas stove/heater. Plan is long trips on the BC coast so lots of fuel for...
  • olekils
    olekils replied to the thread Tomcat 24 with Suzuki 140s?.
    Sounds like a big job, what's the diesel tank for? Do you have a build thread? Would love to check out your boat.
  • olekils
    olekils replied to the thread Tomcat 24 with Suzuki 140s?.
    I've got 2013 Honda BF135's on my TC24. They are kindof old school 4-strokes and pretty heavy (478lb each). My boat was hull #2 so...
  • olekils
    olekils replied to the thread repair rub rail.
    I ended up replacing all of my rivets with these SS barrel nuts from McMaster. It leaves a very clean finish inside of the cabin...
    • hardware_McMaster.jpg
    • Hardware_2.jpg
    • Hardware_3.jpg
    • Hardware_1.jpg
    • Hardware_A (1).jpg
  • olekils
    Skippythedog, I put a lot of time in the helm seat of my 26. After the first 100+ hours, I could no longer stand the existing seat and...
  • olekils
    This is probably not exactly what you are looking for but I'm in the process of adding a shockwave suspension seat to my TC24. It's...
    • Screenshot 2026-03-17 105936.jpg
    • Screenshot 2026-03-17 110037.jpg
    • Screenshot 2026-03-17 110100.jpg
  • olekils
    olekils reacted to JamesTXSD's post in the thread Slapping with Like Like.
    Your conscience may not appreciate this response. If you want your wife to enjoy being out on the boat with you, drive it to please...
Back
Top