Recent content by marco422

  1. M

    CD 16 core in sump?

    Thanks.
  2. M

    CD 16 core in sump?

    I am sure this question has been asked, but I couldn't find the answer with a search: I have a 2006 16 Cruiser and want to install a Airmar P79 thru-hull transducer. Is the sump (depression) under the bilge pump cored or is it solid? Thanks for any help...
  3. current configuration of instrument panel with new Floscan, etc

    current configuration of instrument panel with new Floscan, etc

    current configuration of instrument panel with new Floscan, etc
  4. cabin layout with new Standard Horizon Matrix GX2150 with AIS

    cabin layout with new Standard Horizon Matrix GX2150 with AIS

    cabin layout with new Standard Horizon Matrix GX2150 with AIS
  5. loud hailer/foghorn under brow and Shakespeare 3ft antenna mounted on stbd handrail

    loud hailer/foghorn under brow and Shakespeare 3ft antenna mounted on stbd handrail

    loud hailer/foghorn under brow and Shakespeare 3ft antenna mounted on stbd handrail
  6. smaller Ritchie X10M mounted away from magnetics (don't use compass very often with GPS)

    smaller Ritchie X10M mounted away from magnetics (don't use compass very often with GPS)

    smaller Ritchie X10M mounted away from magnetics (don't use compass very often with GPS)
  7. 12V outlet and battery switch mounted on stbd quarter

    12V outlet and battery switch mounted on stbd quarter

    12V outlet and battery switch mounted on stbd quarter
  8. M

    Marinaut drawings 1/4 in = 1 foot

    Scaled the Marinaut drawings off the website to 1/4 in = 1 foot for the use of dreamers until official drawings become available. Hope that's all right...
  9. M

    Welcome!

    Scaled the Marinaut drawings off the website to 1/4 in = 1 foot for the use of dreamers until official drawings become available. Hope that's all right... http://www.c-brats.com/modules.php?set_albumName=Gaiasika&id=Marinaut_drawings&op=modload&name=gallery&file=index&include=view_photo.php
  10. Marinaut drawings 1/4 inch = 1 foot

    Marinaut drawings 1/4 inch = 1 foot

    Marinaut drawings 1/4 inch = 1 foot
  11. M

    Observations and questions from Starcrafttom

    Is that a permanent setup or can it be customized for each buyer? I am not a fisherman and I would want the fuel fills outside any camperback that was installed. I love this boat and am watching development carefully as I work out my finances for a purchase in the not-too-distant future...
  12. M

    hooked up battery backwards

    Check the fuse under the hood on your port motor...
Back
Top