Prev
Yet another boater lent me this great little rasp bit that was exactly the right diameter (luckily I brought my drill)
Next
Prev
These machine screws should really be flush so I can compress the butyl tape without the frame bottoming out so I carefully filed them down.
While the balsa was airing out and I waited for an order of epoxy I set to clean all the caulk residue from the hatch frame .
I got a huge garbage bag from the Alton marina to make a dust catcher attached from below with masking tape. (the Alton marina in Illinois is covered which is why I choose to do this project now.
Yet another boater lent me this great little rasp bit that was exactly the right diameter (luckily I brought my drill)
I took out all the rotten core until I hit dry balsa (as deep a one inch in a few places but mostly about 5/8).
Because the hatch had also been caulked form the inside - and that had mostly held up over the years - water was getting trapped and rotted some balsa core.
Another boater lent me this great little pull scraper to clean up the parameter.
Next
S

Yet another boater lent me this great little rasp bit that was exactly the right diameter (luckily I brought my drill)

  • Media owner sebastien
  • Date added
Yet another boater lent me this great little rasp bit that was exactly the right diameter (luckily I brought my drill)
Click to expand...
There are no comments to display.

Media information

Category
Front hatch repair
Album
The main hatch has has been leaking for a while but I wanted to get off the great lakes before taking it apart (I made a quick and dirty rain cover that attached into the four existing snaps for the sun shade)
Added by
sebastien
Date added
View count
3
Comment count
0
Rating
0.00 star(s) 0 ratings

Share this media

Back
Top