Prev
Working Alone: nuts inside cabin wrench on roof
Next
Prev
C94A34DC-0487-4A91-8220-ECE4B77AFEDC
Since NOTHING will adhere to Starboard, I used butyl tape between the bottom of the holes where they met the cabin top.. tight acorn nuts underneath with fender washers make a durable seal
Working Alone: bolts from cabin roof. To seal I made a small circle of 5200 on bottoms of flanges and around holes on cabin top. The handrails were suspended just above holes for fine alignment without smearing sealant.
Working Alone: nuts inside cabin wrench on roof
115108E1-99DF-426B-B451-3A6CD73B3EDE
Holes redrilled perpendicular
Filled and flush Taped underside of cabin roof and filled with paper funnel after brushing balsa core with unthickened epoxy
Next
multimediasmith

Working Alone: nuts inside cabin wrench on roof

Working Alone: nuts inside cabin wrench on roof
Click to expand...
There are no comments to display.

Media information

Category
CD-25 Re-Bed Rails, Roof Repair, Ceramic Coating
Album
Covered previous holes with large starboard after filling and redrilling holes and rebedding handrails with 5200 to correct cabin roof leaks
Added by
multimediasmith
Date added
View count
1
Comment count
0
Rating
0.00 star(s) 0 ratings

Share this media

Back
Top