windless 3/32" backing plate on top of 1/2" white plastic (2)
Next
Prev
windless 3/32" backing plate on top of 1/2" white plastic (2)
windless backing plate (1)
Starboard Transom D Ring Backing Plate
Starboard Stern Cleat
Starboard Midship Cleat
Port Transom Towing D Ring Backing Plate. NOTE: 2 - layers of 1/2" of painted plywood, bedded with 3M 4200 and SS fender washers, then double nutted. Again as throught the boat the Transom holes are routered out and filled back in with thickened apoxy to reduce crushing of foam laminated transom.
Port stern cleat backing plate. NOTE: All the backing plates are bedded with 3M 4200 caulking.
Next
R

windless 3/32" backing plate on top of 1/2" white plastic (2)

windless 3/32" backing plate on top of 1/2" white plastic (2)
Click to expand...
There are no comments to display.

Media information

Category
2009 23 Venture Backing Plates on "Pacific Wanderer"
Album
Bow Cleat backing plate NOTE: The white square patches are backing for the insulating foam liner that is throught the inside of our 2009 23 Venture.
Added by
ross_ballard
Date added
View count
4
Comment count
0
Rating
0.00 star(s) 0 ratings

Share this media

Back
Top