Prev
Wallas 1300 Install - DSC06140
Next
Prev
Wallas 1300 Install - DSC06145
Wallas 1300 Install - DSC06143 Ready to start drilling
Wallas 1300 Install - DSC06142 Made an "L" shaped bracket and drilled it to match the Wallas hanger. Will allow mounting in a tight spot between the hull and the lowered table, with just enough clearance above for the intake/exhaust, and just enough below for the fuel and return lines.
Wallas 1300 Install - DSC06140
Wallas 1300 Install - DSC06139
Wallas 1300 Install - DSC06133 - 12V socket and table latch will also have to be moved.
Wallas 1300 Install - DSC06132 Checked and rechecked clearances. It will be tight. Checked with SCAN Marine who assured me mounting the heater like this would be fine.
Next
N

Wallas 1300 Install - DSC06140

  • Media owner NORO LIM
  • Date added
Wallas 1300 Install - DSC06140
Click to expand...
There are no comments to display.

Media information

Category
NORO LIM Wallas 1300 Heater Installation
Album
Wallas 1300 Install - - DSC06129 Aft seat, shelving, & table; Heater to go where the shelving narrows - next to, and just forward of the aft seat. Chose the Wallas 1300 model because it's the most compact, and because I already had a kerosene stove.
Added by
NORO LIM
Date added
View count
6
Comment count
0
Rating
0.00 star(s) 0 ratings

Share this media

Back
Top