Prev
Wallas 1300 Install - DSC06131
Next
Prev
Wallas 1300 Install - DSC06139
Wallas 1300 Install - DSC06133 - 12V socket and table latch will also have to be moved.
Wallas 1300 Install - DSC06132 Checked and rechecked clearances. It will be tight. Checked with SCAN Marine who assured me mounting the heater like this would be fine.
Wallas 1300 Install - DSC06131
Wallas 1300 Install - DSC06130 View below the raised table. Shelving will be removed here, and the outboard edge of the forward seat cushion (shown on the right) will be trimmed by about 1/2 inch to allow the table to hang just slightly further away from the hull to make room for the heater.
Wallas 1300 Install - - DSC06129 Aft seat, shelving, & table; Heater to go where the shelving narrows - next to, and just forward of the aft seat. Chose the Wallas 1300 model because it's the most compact, and because I already had a kerosene stove.
Next
N

Wallas 1300 Install - DSC06131

  • Media owner NORO LIM
  • Date added
Wallas 1300 Install - DSC06131
Click to expand...
There are no comments to display.

Media information

Category
NORO LIM Wallas 1300 Heater Installation
Album
Wallas 1300 Install - - DSC06129 Aft seat, shelving, & table; Heater to go where the shelving narrows - next to, and just forward of the aft seat. Chose the Wallas 1300 model because it's the most compact, and because I already had a kerosene stove.
Added by
NORO LIM
Date added
View count
5
Comment count
0
Rating
0.00 star(s) 0 ratings

Share this media

Back
Top