Vessel name was printed with MS WORD on a 'Clear Shipping Label', 11/2"x41/8", by AVERY. It was set in place and sprayed with a clear acrylic spray that you can get at any art supply or hardware store. The 3/8" line was hot glued to the base's outer edge.
Next
Prev
Vessel name was printed with MS WORD on a 'Clear Shipping Label', 11/2"x41/8", by AVERY. It was set in place and sprayed with a clear acrylic spray that you can get at any art supply or hardware store. The 3/8" line was hot glued to the base's outer edge.
The backplate did not need to be screwed to the bulkhead, only secured with 3M adhesive (5200).
Two (2) brass eye hooks with a salvaged toilet bowl float arm rod that acts as a securing pin and a lanyard to keep from losing it.
The WX Station is mounted with a hinged back for easy access to the clock battery & its adjustment.
Next
S

Vessel name was printed with MS WORD on a 'Clear Shipping Label', 11/2"x41/8", by AVERY. It was set in place and sprayed with a clear acrylic spray that you can get at any art supply or hardware store. The 3/8" line was hot glued to the base's outer edge.

  • Media owner Sea Angel
  • Date added
Vessel name was printed with MS WORD on a 'Clear Shipping Label', 11/2"x41/8", by AVERY. It was set in place and sprayed with a clear acrylic spray that you can get at any art supply or hardware store. The 3/8" line was hot glued to the base's outer edge.
Click to expand...
There are no comments to display.

Media information

Category
Sea Angel WX Station
Album
The WX Station is mounted with a hinged back for easy access to the clock battery & its adjustment.
Added by
Sea Angel
Date added
View count
1
Comment count
0
Rating
0.00 star(s) 0 ratings

Share this media

Back
Top