Prev
Used existing hole and bolt added the turnbuckle mounted wiith backing plate tightened up turnbuckle. Did stiffen up fenders added to front and back both sides
Next
Prev
Ready to install fender brace provided by Float On.Seems like it should be longer and have different bends so it will attach further out on the fender mounting channel
backing plate
rear of fender
Used existing hole and bolt added the turnbuckle mounted wiith backing plate tightened up turnbuckle. Did stiffen up fenders added to front and back both sides
stainless steel bolt heads on the fender support show plate bolted in underneath step all the way thru and bolted to the trailers frame
fender support with brace installed
A closer picture of the new 1600PSI electric over hydraulic brake actuator with the Carlisle HBA Cam adapter which is recommended to make the controller think it's still controlling electric brakes rather than hydraulic brakes. Cam stands for Control Adapter Module
Next
W

Used existing hole and bolt added the turnbuckle mounted wiith backing plate tightened up turnbuckle. Did stiffen up fenders added to front and back both sides

  • Media owner Will-C
  • Date added
Used existing hole and bolt added the turnbuckle mounted wiith backing plate tightened up turnbuckle. Did stiffen up fenders added to front and back both sides
Click to expand...
There are no comments to display.

Media information

Category
Trailer Mods
Album
P1000486 Some scrap 3 x 4" aluminum angle 1/2" stainless u-bolt 35 dollar stainless turnbuckle, short piece of chain, and a shackle.
Added by
Will-C
Date added
View count
2
Comment count
0
Rating
0.00 star(s) 0 ratings

Share this media

Back
Top