Prev
trying to keep it flat during the weld repair
Next
Prev
port motor siezed completely in the san juans summer of 2020. turned out it was one of the magnets inside the flywheel had come off and become wedged in against the charging coils.
something wrong with the wallas. a howling noise accompanies this condition, it goes away after a while. I called scan in seattle, and they said it is dirty and could be cleaned and serviced. after they looked at it, I was told it needs a new mother board and they aren\'t available for the 95d. they said there is no danger, just use it until it stops working.
first trip out to ilwaco
trying to keep it flat during the weld repair
strongback
ground off the paint to prepare for the weld. i should have ground off the paint on the back side too, my weld was not very good and had lots of contamination it it and I think it was pulling paint and crap from the back side into the puddle
large crack
Next
C

trying to keep it flat during the weld repair

trying to keep it flat during the weld repair
Click to expand...
There are no comments to display.

Media information

Category
Broken Stuff
Album
broke the cav plate summer 2020 in the san juans. I remember hitting a large stick, but didn't even think to look for damage. the wife noticed this after we pulled the boat out in bellingham
Added by
clayhubler
Date added
View count
1
Comment count
0
Rating
0.00 star(s) 0 ratings

Share this media

Back
Top