Prev
"Tool" for removing through hull since I didn't have the proper tool on hand. Old junk file to catch on the "ears" inside the through hull and vise grips to hold file.
Next
Prev
Dremel with sanding drum used. Pardon the blur but it gives the idea.
After enlarging to new size - used Dremel with sanding drum, sanded to pencil line. I taped a plastic bag around the hole on the inside to keep dust out of the boat, and also had a vacuum nozzle taped to the topsides on the outside where I was working.
Original hole for 3/4" through-hull that connects to sink drain, marked for enlarging to fit 1" through-hull.
"Tool" for removing through hull since I didn't have the proper tool on hand. Old junk file to catch on the "ears" inside the through hull and vise grips to hold file.
the lab
reinstalled
filled with thickened epoxy
Next
S

"Tool" for removing through hull since I didn't have the proper tool on hand. Old junk file to catch on the "ears" inside the through hull and vise grips to hold file.

  • Media owner Sunbeam
  • Date added
"Tool" for removing through hull since I didn't have the proper tool on hand. Old junk file to catch on the "ears" inside the through hull and vise grips to hold file.
Click to expand...
There are no comments to display.

Media information

Category
Fresh-water system related
Album
fill removed, dry core
Added by
Sunbeam
Date added
View count
0
Comment count
0
Rating
0.00 star(s) 0 ratings

Share this media

Back
Top