Prev
This is the stick-on conduit I used.
Next
Prev
This is the Rustoleum paint that I used. I sprayed my spare prop to see how close it was to the C Dory gel coat color.
This is the stick-on conduit I used.
A close up of the wiring. I'm putting all of my wiring in this stuff. Much faster and cheaper than driving little stainless screws into the boat and much nicer looking than black smurf tubing.
Here is the wiring placed in cream colored conduit running right up the side of the window. I used this on the transom to cover the depth sounder cable and thought I would try it here.
Once dry, it gets sprayed with an off white paint that is fairly close to the gel coat color. The surface of the rubber paint would attract too much dirt. Notice the black conduit hanging down. Black wiring was strung all around the boat. I can fix that.
Even the roof of the cabin gets a layer.
I used my shop vac to blow warm air in. I left it on over night because I had sprayed so much material (about 3 gallons).
Next
M

This is the stick-on conduit I used.

This is the stick-on conduit I used.
Click to expand...
There are no comments to display.

Media information

Category
Insulating Coating
Album
This is my home-brew insulating paint. It is some leftover latex water proofing paint used on concrete block prior to applying a stucco finish. It dries thick and to a consistency about like a pencil eraser. I'm adding micro balloons to it (the secret ingredient).
Added by
Marco Flamingo
Date added
View count
2
Comment count
0
Rating
0.00 star(s) 0 ratings

Share this media

Back
Top