Prev
These machine screws should really be flush so I can compress the butyl tape without the frame bottoming out so I carefully filed them down.
Next
Prev
Thanks to another boater with a rental car I got the third tube I needed to finish the fill
This is what I've used on all the bedding and preventative balsa protection I've done on the boat and I really like working with it.
I filled the gap with epoxy in two stages (partly because my epoxy order was short one tube and getting some locally without a car turned out to be difficult)
These machine screws should really be flush so I can compress the butyl tape without the frame bottoming out so I carefully filed them down.
While the balsa was airing out and I waited for an order of epoxy I set to clean all the caulk residue from the hatch frame .
I got a huge garbage bag from the Alton marina to make a dust catcher attached from below with masking tape. (the Alton marina in Illinois is covered which is why I choose to do this project now.
Yet another boater lent me this great little rasp bit that was exactly the right diameter (luckily I brought my drill)
Next
S

These machine screws should really be flush so I can compress the butyl tape without the frame bottoming out so I carefully filed them down.

  • Media owner sebastien
  • Date added
These machine screws should really be flush so I can compress the butyl tape without the frame bottoming out so I carefully filed
them down.
Click to expand...
There are no comments to display.

Media information

Category
Front hatch repair
Album
The main hatch has has been leaking for a while but I wanted to get off the great lakes before taking it apart (I made a quick and dirty rain cover that attached into the four existing snaps for the sun shade)
Added by
sebastien
Date added
View count
4
Comment count
0
Rating
0.00 star(s) 0 ratings

Share this media

Back
Top