The black rectangle is my "customer welcome mat" sensor. It is set up through a relay to blast the horn. It is surprising how long it takes people to figure out what they are doing to set off the alarm.
Next
Prev
The black rectangle is my "customer welcome mat" sensor. It is set up through a relay to blast the horn. It is surprising how long it takes people to figure out what they are doing to set off the alarm.
This is a little plastic-coated stainless wire combination lock generally used to keep people from walking off with your laptop or skateboard. I bought a lot of 10 cheap on Ebay and use them for electronics, etc. Good wire snips would cut it, but not a pocket knife or a hard tug.
Like most radios, mine just has twist knobs to hold it to the bracket. I used the right length screw to drill a hole through the knob and into the bracket (and not into the radio). The bracket can't be removed with the radio in place. A thief would need to figure out the problem and have a short-shaft #2 square drive screwdriver.
Next
M

The black rectangle is my "customer welcome mat" sensor. It is set up through a relay to blast the horn. It is surprising how long it takes people to figure out what they are doing to set off the alarm.

The black rectangle is my "customer welcome mat" sensor. It is set up through a relay to blast the horn. It is surprising how long it takes people to figure out what they are doing to set off the alarm.
Click to expand...
There are no comments to display.

Media information

Category
Security
Album
Like most radios, mine just has twist knobs to hold it to the bracket. I used the right length screw to drill a hole through the knob and into the bracket (and not into the radio). The bracket can't be removed with the radio in place. A thief would need to figure out the problem and have a short-shaft #2 square drive screwdriver.
Added by
Marco Flamingo
Date added
View count
3
Comment count
0
Rating
0.00 star(s) 0 ratings

Share this media

Back
Top