Prev
Thanks to another boater with a rental car I got the third tube I needed to finish the fill
Next
Prev
I used butyl tape (two layers in this application) from Sailrite to bed the frame.
It turned out great and all the screw holes are isolated from the balsa (something the factory should really have done too!)
I was pretty diligent when working with the epoxy so I just had to hand sand the edge.
Thanks to another boater with a rental car I got the third tube I needed to finish the fill
This is what I've used on all the bedding and preventative balsa protection I've done on the boat and I really like working with it.
I filled the gap with epoxy in two stages (partly because my epoxy order was short one tube and getting some locally without a car turned out to be difficult)
These machine screws should really be flush so I can compress the butyl tape without the frame bottoming out so I carefully filed them down.
Next
S

Thanks to another boater with a rental car I got the third tube I needed to finish the fill

  • Media owner sebastien
  • Date added
Thanks to another boater with a rental car I got the third tube I needed to finish the fill
Click to expand...
There are no comments to display.

Media information

Category
Front hatch repair
Album
The main hatch has has been leaking for a while but I wanted to get off the great lakes before taking it apart (I made a quick and dirty rain cover that attached into the four existing snaps for the sun shade)
Added by
sebastien
Date added
View count
7
Comment count
0
Rating
0.00 star(s) 0 ratings

Share this media

Back
Top