Prev
Starboard polished ready for decal
Next
Prev
6 holes filled polished new decal port side
Starboard glasswork done and new decal
11 transom screws or former screws sealed with adhesive sealant were removed, properly filled, and a gelcoat patch kit applied. Color matching of the kit was definitely off.
Starboard polished ready for decal
Starboard gelcoat was applied but did not fully fill the depressions. Cleaned with acetone and applied a second coat. After sanding level a few air bubbles showed so a third very light "wash" coat filled the bubbles and it ended up a perfect color match.
Starboard glasswork ready for gelcoat
Holes were drilled out, cleaned, and surfboard epoxy filled. Gelcoat will adhere to surfboard epoxy with no problems. Holes are ready for gelcoat.
Next
S

Starboard polished ready for decal

  • Media owner Sneaks
  • Date added
Starboard polished ready for decal
Click to expand...
There are no comments to display.

Media information

Category
Gelcoat repairs
Album
11 transom screws or former screws sealed with adhesive sealant were removed, properly filled, and a gelcoat patch kit applied. Color matching of the kit was definitely off.
Added by
Sneaks
Date added
View count
3
Comment count
0
Rating
0.00 star(s) 0 ratings

Share this media

Back
Top